Homeduino device config "switch22"

Petjepet

Hello,

I have a “Relay 2CH switch” remote generating the Switch22 protocol:

switch22: { id: 216913, command: ‘A’ }

Now I’m trying to get the device configured but run into some issues: "swtich22"must be one of the following types: “switch”.

I defined it as a HomeduineRFSwitch:

{
  "id": "rfswitch-garage-open",
  "name": "Garagedeur open",
  "class": "HomeduinoRFSwitch",
  "protocols": [
    {
      "name": "switch22",
      "options": {
        "id": 216913,
        "command": "A"
      }
    }
  ]
},

What is going wrong?

Petjepet

I guessed I solved it. But did not work.
Had to be a button device to present two buttons:

{
  "id": "rfswitch-garage",
  "name": "Garagedeur",
  "class": "HomeduinoRFButtonsDevice",
  "buttons": [
    {
      "id": "opegarage-open-button",
      "text": " Garage open",
      "protocols": [
        {
          "name": "switch22",
          "options": {
            "id": 216913,
            "command": "A"
          }
        }
      ]
    },
    {
      "id": "opegarage-close-button",
      "text": " Garage dicht",
      "protocols": [
        {
          "name": "switch22",
          "options": {
            "id": 216913,
            "command": "B"
          }
        }
      ]
    }
  ]
},

Petjepet

Too early to call.
The code is accepted to represent two buttons but the garage door does not respond.

This 2CH receiver/transmitter is to be configured.
Each channel triggers a relais. Push A, relay 1 makes contact. Release A, relay releases contact: Jog mode it is called I believe.

I’m not sure about the “command” option of the “Switch22” protocol.
Can someone help me out?

Debug code when pushing button A on the remote:

debug [pimatic-homeduino]: doorbell1:  { id: 3884, unit: 1930, state: true }
debug [pimatic-homeduino]: led4:  { id: 51978, command: 'code:11100001' }
debug [pimatic-homeduino]: led3:  { id: 51978, command: 'code:11100001' }
debug [pimatic-homeduino]: led2:  { id: 51978, command: 'code:11100001' }
debug [pimatic-homeduino]: led1:  { id: 51978, command: 'code:11100001' }
debug [pimatic-homeduino]: contact3:  { id: 216913, contact: false }
debug [pimatic-homeduino]: contact2:  { id: 216913, contact: false }
debug [pimatic-homeduino]: pir2:  { unit: 6, id: 19, presence: true }
debug [pimatic-homeduino]: switch22:  { id: 216913, command: 'A' }
debug [pimatic-homeduino]: switch19:  { id: undefined, unit: undefined, state: undefined }
debug [pimatic-homeduino]: switch15:  { id: 831662, unit: 0, state: true, all: true }
debug [pimatic-homeduino]: switch5:  { id: 216913, unit: 0, all: true, state: false }
debug [pimatic-homeduino]: received: [ 348, 1052, 10660 ] 10100101100110100101010110011001101010010101011002
debug [pimatic-homeduino]: data: "RF receive 1052 348 10660 0 0 0 0 0 01011010011001011010101001100110010101101010100112"

Debug code when pushing button B on the remote:

debug [pimatic-homeduino]: doorbell1:  { id: 3884, unit: 906, state: false }
debug [pimatic-homeduino]: led4:  { id: 51978, command: 'code:11100010' }
debug [pimatic-homeduino]: led3:  { id: 51978, command: 'code:11100010' }
debug [pimatic-homeduino]: led2:  { id: 51978, command: 'code:11100010' }
debug [pimatic-homeduino]: led1:  { id: 51978, command: 'code:11100010' }
debug [pimatic-homeduino]: contact3:  { id: 216913, contact: true }
debug [pimatic-homeduino]: contact2:  { id: 216913, contact: false }
debug [pimatic-homeduino]: pir2:  { unit: 6, id: 19, presence: true }
debug [pimatic-homeduino]: switch22:  { id: 216913, command: 'B' }
debug [pimatic-homeduino]: switch19:  { id: undefined, unit: undefined, state: undefined }
debug [pimatic-homeduino]: switch15:  { id: 831662, unit: 0, state: true, all: true }
debug [pimatic-homeduino]: switch5:  { id: 216913, unit: 0, all: true, state: true }
debug [pimatic-homeduino]: received: [ 348, 1048, 10632 ] 10100101100110100101010110011001101010010101100102
debug [pimatic-homeduino]: data: "RF receive 1048 348 10632 0 0 0 0 0 01011010011001011010101001100110010101101010011012"

What first seems strange and I don’t understand that it is a 2 channel device where I would expect different unit/id’s for A and B.
For sure A operates relay 1 and B operates relay 2.
The garage door is working like that: pulse from relay 1 to open, pulse again to intermediate stop, pulse again open, etc until fully open. For close the same operation using relay 2.>! Spoiler

derksuh

Maybe @mwittig or @Icesory or @sweebee has an idea?

leader21

you could give it a try with switch 5 protocol.
have a look here

https://forum.pimatic.org/topic/1031/chinese-4ch-relay-remote-control/3

Petjepet

Hi Leader21,

I gave it a try with this:

{
  "id": "rfswitch-garage-door",
  "name": "Garagedeur",
  "class": "HomeduinoRFButtonsDevice",
  "buttons": [
    {
      "id": "opegarage-open-button",
      "text": "Open",
      "protocols": [
        {
          "name": "switch5",
          "options": {
            "id": 216913,
            "unit": 0,
            "all": true,
            "state": false
          }
        }
      ]
    },
    {
      "id": "opegarage-close-button",
      "text": "Dicht",
      "protocols": [
        {
          "name": "switch5",
          "options": {
            "id": 216913,
            "unit": 0,
            "all": true,
            "state": true
          }
        }
      ]
    }
  ]
},

It did not work.

It could be a range issue.

However I would expect the buttons on the Pimatic interface to switch when I use the original remote, just like the Switch3 protocol does. Would that be a first indicator of using the right protocol?