Silvercrest BT thermo

s3bb0

Hi all,

i want to use the following product with pimatic:
http://www.lidl.de/de/silvercrest-programmierbarer-heizkoerperregler-bluetooth-rt2000bt/p212040

does anybody know if it will work with pimatic, if i use a suitable USB BT stick on the Pi ?
thanks !

leader21

@s3bb0
guess not out of the box.
If you want a reliable and affordable hardware go for the max! heating system. having it too. works perfectly.
also the avm/fritz solution works with pimatic but the thermostats are expensive.

temp

@leader21 you mean this? http://www.conrad.com/ce/en/product/519588/eQ-3-MAX-Wireless-thermostat-head;jsessionid=78CE5F2568F7541B96F354ACE5144FAB.ASTPCEN19?ref=list

leader21

yes exactly. but you need to have the cube too. This is the gateway. check www.elv.de they have several sets and also diy solutions which are a bit cheaper.

don’t know about your soldering skills, but check this here for more information http://forum.pimatic.org/topic/169/max-wt-thermostate-diy-kit-assembly-instructions/
there is also a link to Saschas blog with more info on the diy kits. The wt+ wall thermostat is not easy to assemble since the display has many small pins to solder. but the cube and the radiator thermostats are with little soldering skills easy to assemble. and the door/window contact is just putting togehter some parts without any soldering.

here are the ready build sets
http://www.elv.de/output/controller.aspx?cid=74&detail=1&detail2=1872

and here the diy sets
http://www.elv.de/max-funk-heizungsregler-system-heizungssteuerung-heizkosten-sparen.html