Proove TSS320 Weather sensor, 433mhz not decoded right

---

I have an old Proove TSS320 Thermo/Hygro Sensor that i just found (it had been hiding for quite a while). It worked with my tellstick.net setup, but the decoded values in my Log Messages doesn’t fit with the measured values.

04:51:49 debug [pimatic-homeduino]: weather13: { id: 97, channel: 1, temperature: 1.2, humidity: 68, lowBattery: true }
04:51:49 debug [pimatic-homeduino]: weather10: { id: 388, channel: 1, temperature: 1.2 }
04:51:49 debug [pimatic-homeduino]: weather2: { temperature: 1.2 }
04:51:49 debug [pimatic-homeduino]: received: [ 488, 972, 1948, 3900 ] 01020201010101020101010101010101010101010202010102020202010201010102010103
04:51:49 debug [pimatic-homeduino]: data: "RF receive 488 972 1948 3900 0 0 0 0 01020201010101020101010101010101010101010202010102020202010201010102010103"

It should have been { id: 23 (* i think , channel: 2, temperature: 19.9, humidity: 48, lowBattery: false }

Any tips on how to make that work?

Haven’t found a manufacturer link, but this site sells them http://cdon.no/hus-hage/proove-thermo-hygro-sensor-white-p27546361

@beikeland It would be easier to decode, if we got more examples with temperature, humidity and maybe other channels and low battery I’m no pro, but with this example, I can’t figure it out!

I tried changing the channel but to me it seemed like the received data didn’t change at all. Current plan is to replace batteries and have another go, some day. But it just may be sensor is bad; although it did work with the original tellstick.net setup back in the day.