[Solved] Another RF LED Stripe Device

---

For this device I kindly request a protocol

The debug inputs are as follows, every button pressed twice for a short time.

On / Off Button

21:18:07debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:18:07debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:18:07debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: false }
21:18:07debug [pimatic-homeduino]: received: [ 428, 1232, 13020 ] 01010110101001101010100110011001010101010101011002
21:18:07debug [pimatic-homeduino]: data: "RF receive 428 1232 13020 0 0 0 0 0 01010110101001101010100110011001010101010101011002"
21:18:06debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:18:06debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:18:06debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: false }
21:18:06debug [pimatic-homeduino]: received: [ 430, 1230, 13016 ] 01010110101001101010100110011001010101010101011002
21:18:06debug [pimatic-homeduino]: data: "RF receive 430 1230 13016 0 0 0 0 0 01010110101001101010100110011001010101010101011002"

light

21:16:24debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:16:24debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:16:24debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: true }
21:16:24debug [pimatic-homeduino]: received: [ 428, 1233, 13016 ] 01010110101001101010100110011001010101010110010102
21:16:24debug [pimatic-homeduino]: data: "RF receive 428 1233 13016 0 0 0 0 0 01010110101001101010100110011001010101010110010102"
21:16:22debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:16:22debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:16:22debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: true }
21:16:22debug [pimatic-homeduino]: received: [ 426, 1235, 13028 ] 01010110101001101010100110011001010101010110010102
21:16:22debug [pimatic-homeduino]: data: "RF receive 426 1235 13028 0 0 0 0 0 01010110101001101010100110011001010101010110010102"

Bright +

21:19:19[pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:19:19debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:19:19debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: false }
21:19:19debug [pimatic-homeduino]: received: [ 433, 1227, 13020 ] 01010110101001101010100110011001010101010110011002
21:19:19debug [pimatic-homeduino]: data: "RF receive 433 1227 13020 0 0 0 0 0 01010110101001101010100110011001010101010110011002"
21:19:18debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:19:18debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:19:18debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: false }
21:19:18debug [pimatic-homeduino]: received: [ 436, 1224, 13016 ] 01010110101001101010100110011001010101010110011002
21:19:18debug [pimatic-homeduino]: data: "RF receive 436 1224 13016 0 0 0 0 0 01010110101001101010100110011001010101010110011002"

Bright -

21:20:10debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:20:10debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:20:10debug [pimatic-homeduino]: switch5: { id: 926047, unit: 4, all: false, state: false }
21:20:10debug [pimatic-homeduino]: received: [ 432, 1227, 13020 ] 01010110101001101010100110011001010101010110100102
21:20:10debug [pimatic-homeduino]: data: "RF receive 432 1227 13020 0 0 0 0 0 01010110101001101010100110011001010101010110100102"
21:20:08debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:20:08debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:20:08debug [pimatic-homeduino]: switch5: { id: 926047, unit: 4, all: false, state: false }
21:20:08debug [pimatic-homeduino]: received: [ 433, 1227, 13024 ] 01010110101001101010100110011001010101010110100102
21:20:08debug [pimatic-homeduino]: data: "RF receive 433 1227 13024 0 0 0 0 0 01010110101001101010100110011001010101010110100102"

100%

21:21:34debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:21:34debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:21:34debug [pimatic-homeduino]: switch5: { id: 926047, unit: 4, all: false, state: true }
21:21:34debug [pimatic-homeduino]: received: [ 443, 1216, 13000 ] 01010110101001101010100110011001010101010110101002
21:21:34debug [pimatic-homeduino]: data: "RF receive 443 1216 13000 0 0 0 0 0 01010110101001101010100110011001010101010110101002"
21:21:32debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:21:32debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:21:32debug [pimatic-homeduino]: switch5: { id: 926047, unit: 4, all: false, state: true }
21:21:32debug [pimatic-homeduino]: received: [ 442, 1216, 12992 ] 01010110101001101010100110011001010101010110101002
21:21:32debug [pimatic-homeduino]: data: "RF receive 442 1216 12992 0 0 0 0 0 01010110101001101010100110011001010101010110101002"

50%

21:08:43debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:08:43debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:08:43debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: true }
21:08:43debug [pimatic-homeduino]: received: [ 427, 1234, 13032 ] 01010110101001101010100110011001010101011001010102
21:08:43debug [pimatic-homeduino]: data: "RF receive 427 1234 13032 0 0 0 0 0 01010110101001101010100110011001010101011001010102"
21:08:43debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:08:43debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:08:43debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: true }
21:08:43debug [pimatic-homeduino]: received: [ 426, 1235, 13044 ] 01010110101001101010100110011001010101011001010102
21:08:43debug [pimatic-homeduino]: data: "RF receive 426 1235 13044 0 0 0 0 0 01010110101001101010100110011001010101011001010102"

25%

21:09:18debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:09:18debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:09:18debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: false }
21:09:18debug [pimatic-homeduino]: received: [ 435, 1226, 13024 ] 01010110101001101010100110011001010101011001011002
21:09:18debug [pimatic-homeduino]: data: "RF receive 435 1226 13024 0 0 0 0 0 01010110101001101010100110011001010101011001011002"
21:09:17debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:09:17debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:09:17debug [pimatic-homeduino]: switch5: { id: 926047, unit: 0, all: true, state: false }
21:09:17debug [pimatic-homeduino]: received: [ 434, 1227, 13016 ] 01010110101001101010100110011001010101011001011002
21:09:17debug [pimatic-homeduino]: data: "RF receive 434 1227 13016 0 0 0 0 0 01010110101001101010100110011001010101011001011002"

mode +

21:10:18debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:10:18debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:10:18debug [pimatic-homeduino]: switch5: { id: 926047, unit: 3, all: false, state: true }
21:10:18debug [pimatic-homeduino]: received: [ 441, 1218, 13008 ] 01010110101001101010100110011001010101011001101002
21:10:18debug [pimatic-homeduino]: data: "RF receive 441 1218 13008 0 0 0 0 0 01010110101001101010100110011001010101011001101002"
21:10:16debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:10:16debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:10:16debug [pimatic-homeduino]: switch5: { id: 926047, unit: 3, all: false, state: true }
21:10:16debug [pimatic-homeduino]: received: [ 442, 1217, 13008 ] 01010110101001101010100110011001010101011001101002
21:10:16debug [pimatic-homeduino]: data: "RF receive 442 1217 13008 0 0 0 0 0 01010110101001101010100110011001010101011001101002"

mode -

21:10:52debug [pimatic-homeduino]: contact2: { id: 926046, contact: false }
21:10:52debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:10:52debug [pimatic-homeduino]: switch5: { id: 926046, unit: 0, all: true, state: false }
21:10:52debug [pimatic-homeduino]: received: [ 438, 1222, 13000 ] 01010110101001101010100110011001010101100101011002
21:10:52debug [pimatic-homeduino]: data: "RF receive 438 1222 13000 0 0 0 0 0 01010110101001101010100110011001010101100101011002"
21:10:50debug [pimatic-homeduino]: contact2: { id: 926046, contact: false }
21:10:50debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:10:50debug [pimatic-homeduino]: switch5: { id: 926046, unit: 0, all: true, state: false }
21:10:50debug [pimatic-homeduino]: received: [ 436, 1224, 13004 ] 01010110101001101010100110011001010101100101011002
21:10:50debug [pimatic-homeduino]: data: "RF receive 436 1224 13004 0 0 0 0 0 01010110101001101010100110011001010101100101011002"

speed +

debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:25:07debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:25:07debug [pimatic-homeduino]: switch5: { id: 926047, unit: 1, all: false, state: true }
21:25:07debug [pimatic-homeduino]: received: [ 449, 1209, 13024 ] 01010110101001101010100110011001010101011010101002
21:25:07debug [pimatic-homeduino]: data: "RF receive 449 1209 13024 0 0 0 0 0 01010110101001101010100110011001010101011010101002"
21:25:04debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:25:04debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:25:04debug [pimatic-homeduino]: switch5: { id: 926047, unit: 1, all: false, state: true }
21:25:04debug [pimatic-homeduino]: received: [ 450, 1209, 13008 ] 01010110101001101010100110011001010101011010101002
21:25:04debug [pimatic-homeduino]: data: "RF receive 450 1209 13008 0 0 0 0 0 01010110101001101010100110011001010101011010101002"

speed -

21:22:57debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:22:57debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:22:57debug [pimatic-homeduino]: switch5: { id: 926047, unit: 2, all: false, state: true }
21:22:57debug [pimatic-homeduino]: received: [ 441, 1218, 13004 ] 01010110101001101010100110011001010101011010011002
21:22:57debug [pimatic-homeduino]: data: "RF receive 441 1218 13004 0 0 0 0 0 01010110101001101010100110011001010101011010011002"
21:22:56debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:22:56debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:22:56debug [pimatic-homeduino]: switch5: { id: 926047, unit: 2, all: false, state: true }
21:22:56debug [pimatic-homeduino]: received: [ 441, 1218, 13012 ] 01010110101001101010100110011001010101011010011002
21:22:56debug [pimatic-homeduino]: data: "RF receive 441 1218 13012 0 0 0 0 0 01010110101001101010100110011001010101011010011002"

Hope i did it all right.
when i press the buttons longer there’s some change in the output. don’t know if this matters somehow.

here for example speed + when pressing the button for some seconds

21:13:19debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:13:19debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:13:19debug [pimatic-homeduino]: switch5: { id: 926047, unit: 1, all: false, state: true }
21:13:19debug [pimatic-homeduino]: received: [ 352, 535, 1210, 13024 ] 02020221212102212121210221022102020202022121212103
21:13:19debug [pimatic-homeduino]: data: "RF receive 352 1210 535 13024 0 0 0 0 01010112121201121212120112011201010101011212121203"
21:13:18debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:13:18debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:13:18debug [pimatic-homeduino]: switch5: { id: 926047, unit: 1, all: false, state: true }
21:13:18debug [pimatic-homeduino]: received: [ 414, 545, 1207, 13032 ] 02020220202002212020200221022102020202022121212103
21:13:18debug [pimatic-homeduino]: data: "RF receive 414 1207 545 13032 0 0 0 0 01010110101001121010100112011201010101011212121203"

or here the output for bright -

21:14:18debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:14:18debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:14:18debug [pimatic-homeduino]: switch5: { id: 926047, unit: 4, all: false, state: false }
21:14:18debug [pimatic-homeduino]: received: [ 406, 544, 1225, 13032 ] 02020220202002202120200221022102020202020221210203
21:14:18debug [pimatic-homeduino]: data: "RF receive 406 1225 544 13032 0 0 0 0 01010110101001101210100112011201010101010112120103"
21:14:18debug [pimatic-homeduino]: contact2: { id: 926047, contact: false }
21:14:18debug [pimatic-homeduino]: pir2: { unit: 28, id: 8, presence: true }
21:14:18debug [pimatic-homeduino]: switch5: { id: 926047, unit: 4, all: false, state: false }
21:14:18debug [pimatic-homeduino]: received: [ 414, 542, 1225, 13032 ] 02020220202002212020200220022102020202020221210203
21:14:18debug [pimatic-homeduino]: data: "RF receive 414 1225 542 13032 0 0 0 0 01010110101001121010100110011201010101010112120103"

if you need some more input please let me know !

cheers
chris

This protocol is really easy but it don´t support a real dimlevel.
I think we make a switch protocol to use it with a ButtonsDevice.

Your data

01010110101001101010100110011001010101010101011002 "on/off"
01010110101001101010100110011001010101010110010102 "light"
01010110101001101010100110011001010101010110011002 "heller (Bright+)"
01010110101001101010100110011001010101010110100102 "dunkler (Bright-)"
01010110101001101010100110011001010101010110101002 "100%"
01010110101001101010100110011001010101011001010102 "50%"
01010110101001101010100110011001010101011001011002 "25%"
01010110101001101010100110011001010101011001101002 "mode+"
01010110101001101010100110011001010101100101011002 "mode-"
01010110101001101010100110011001010101011010101002 "speed+"
01010110101001101010100110011001010101011010011002 "speed-"

Mapped with
01 -> 1
10 -> 0

1110001000010101-11111110 "on/off"
1110001000010101-11111011 "light"
1110001000010101-11111010 "heller (Bright+)"
1110001000010101-11111001 "dunkler (Bright-)"
1110001000010101-11111000 "100%"
1110001000010101-11110111 "50%"
1110001000010101-11110110 "25%"
1110001000010101-11110100 "mode+"
1110001000010101-11101110 "mode-"
1110001000010101-11110000 "speed+"
1110001000010101-11110010 "speed-"

Mapped with
01 -> 0
10 -> 1

0001110111101010-00000001 "on/off"
0001110111101010-00000100 "light"
0001110111101010-00000101 "heller (Bright+)"
0001110111101010-00000110 "dunkler (Bright-)"
0001110111101010-00000111 "100%"
0001110111101010-00001000 "50%"
0001110111101010-00001001 "25%"
0001110111101010-00001011 "mode+"
0001110111101010-00010001 "mode-"
0001110111101010-00001111 "speed+"
0001110111101010-00001101 "speed-"

The first 16bit i would use for a ID. The second 8bit are an command.
Commands can be a number like the unit but we can also make this as a string.

The config would be something like that

{
  "id": "homeduino-buttons",
  "name": "Buttons",
  "class": "HomeduinoRFButtonsDevice",
  "buttons": [
    {
      "id": "on-button",
      "text": "On/Off",
      "protocols": [{
        "name": "led2",
        "options": {
          "command": "on/off",
          "id": 42
        }
      }]
    }
  ]
}

or in the old way

{
  "id": "homeduino-buttons",
  "name": "Buttons",
  "class": "HomeduinoRFButtonsDevice",
  "buttons": [
    {
      "id": "on-button",
      "text": "On/Off",
      "protocols": [{
        "name": "led2",
        "options": {
          "unit": 1,
          "id": 42
        }
      }]
    }
  ]
}

The long press is not different from the normal press.

I have done a first release.
https://github.com/Icesory/rfcontroljs/commit/0aa6aabc2a5d10b3eec41d52676295f84b3df55f

I will implement a new protocol type, the “command” protocol.
It is only useable with the ButtonsDevice because of the structure of the protocols.
The protocol do not transport a variable information like the state or a temperature.
They transport exact one command and the on/off command is a toggle command.

sounds all good

guess variable information on led devices do not make any sense at all. there could be more devices to come with similar tasks. let’s see how it works then.
is there an easy way to test things out yet or shall i better wait 'till your implementation is done?

You can download my brunch
https://github.com/Icesory/rfcontroljs/tree/command_protocols
exactly you need only the directory "lib"
This you must put into
…/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/rfcontroljs

and in homduino.coffee you must change this line
https://github.com/Icesory/pimatic-homeduino/blob/development2/homeduino.coffee#L329
to this

          unless _protocol.type is "switch" or "command"

@leader21 i little bit offtopic: Whats the name and price of this device?

http://www.ebay.de/itm/DC12V-RF-Wireless-Remote-Switch-Controller-For-3520-5050-LED-Strips-Light-Dimmer-/371106391051

Whats the range?

Very interesting China-Ship-Schieet
Have to order it …

I own this one : RF RGB Controller
Is there a chance to implement a protocol for this one as well?
I could provide the data of the remote.

try the protocol led2 - should be already mostly supported. My led is also discovered as led1/led2

@georg90 sadly it does not work with the led2 one. In the debug messages it recognizes switch5 and pir2

just to be sure, you did use the experimental branch from Icesory?

so git clone -b command_protocols https://github.com/Icesory/rfcontroljs.git

the device @frosenheimer has there is for rgb stripes.
there are some other buttons like color ±, demo
i’m having a similar device too with some more buttons to pick colors

do the additional buttons need to be “translated” first?
i will open another threat for the rgb led device later, would that make sense?. i guess it should be similar to these ones here except the color buttons. (am unfortunately short of time actually)

The protocol led2 provides personal codes.
Is the received data not decode to usefull string you can use as command some think like this

"command": "code:00110100"

And this should work.

@Icesory thanks. I forgot to change the line in homeduino.coffee

Here are the commands for my RBG Controller (protocol LED2) (as they are recognized by pimatic)

Remote : command in protocol led2

ON/OFF : command: 'on/off’
Mode+ : command: 'bright+'
Mode- : command: 'mode+'
Speed+: command: '25%'
Speed-: command: '100%'
Color+: command: 'code:00001010’
Color-: command: 'speed-'
Bright+: command: 'code:00001100’
Bright-: command: 'speed+'
Demo: command: ‘50%’

Very interesting. The Chinese don’t know some thing like norms

Have any one a good idea to solve this?
I can make a third protocol, which fits the new one. Or I remove the names of the commands and we use only the binary system.

@Icesory little update here… the buttons are in, but my controller does not react.

config:

 {
      "id": "led-buttons",
      "name": "LED Fernbedienung",
      "class": "HomeduinoRFButtonsDevice",
      "buttons": [
        {
          "id": "on-button",
          "text": "An/Aus",
          "protocols": [
            {
              "name": "led2",
              "options": {
                "command": "on/off",
                "id": 21783
              }
            }
          ]
        },
        {
          "id": "demo-button",
          "text": "Demo Modus",
          "protocols": [
            {
              "name": "led2",
              "options": {
                "command": "50%",
                "id": 21783
              }
            }
          ]
        }
      ]
    }

Debug for ON/Off:

11:45:10debug [pimatic-homeduino]: led2: { id: 21783, command: 'on/off' }
11:45:10debug [pimatic-homeduino]: led1: { id: 697056, command: 'on/off' }
11:45:10debug [pimatic-homeduino]: contact2: { id: 700047, contact: false }
11:45:10debug [pimatic-homeduino]: pir2: { unit: 21, id: 11, presence: true }
11:45:10debug [pimatic-homeduino]: switch7: { unit: 0, id: 1, state: false }
11:45:10debug [pimatic-homeduino]: switch5: { id: 700047, unit: 0, all: true, state: false }
11:45:10debug [pimatic-homeduino]: received: [ 414, 1203, 12676 ] 01100110011001100101011001101010010101010101011002
11:45:10debug [pimatic-homeduino]: data: "RF receive 414 1203 12676 0 0 0 0 0 01100110011001100101011001101010010101010101011002"

Debug for Demo:

11:46:24debug [pimatic-homeduino]: led2: { id: 21783, command: '50%' }
11:46:24debug [pimatic-homeduino]: led1: { id: 697057, command: 'unkown command 000' }
11:46:24debug [pimatic-homeduino]: contact2: { id: 700047, contact: false }
11:46:24debug [pimatic-homeduino]: pir2: { unit: 21, id: 11, presence: true }
11:46:24debug [pimatic-homeduino]: switch5: { id: 700047, unit: 0, all: true, state: true }
11:46:24debug [pimatic-homeduino]: received: [ 329, 518, 1220, 12688 ] 02210221022102210202022102212121020202022102020203
11:46:24debug [pimatic-homeduino]: data: "RF receive 329 1220 518 12688 0 0 0 0 01120112011201120101011201121212010101011201010103"

If you need the debug data for the other keys, just mention it

It looks all right.
Do you use a Arduino?

@Icesory i use an arduino uno hooked up to the pi
switching my intertechno devices works flawless

Can you upload the RFControl library from my development branch? Eventually is the protocol more complex as we think.