Hey everybody,
I found some RF switches in my basement and was wondering if somebody is using them as well and what protocol to use for it.
It’s a german manufacture and it says “Funksteckdose NK Funk II” and “Goobay, Wentronic GmbH”
The protocols look like this:
20:43:31.395 [pimatic-homeduino] debug: data: "RF receive 292 1072 460 10976 0 0 0 0 01010101010101100110010101120101011201120112011203"
20:43:31.410 [pimatic-homeduino] debug: received: [ 292, 460, 1072, 10976 ] 02020202020202200220020202210202022102210221022103
20:43:31.441 [pimatic-homeduino] debug: switch2: { houseCode: 28, unitCode: 20, state: true }
20:43:31.451 [pimatic-homeduino] debug: switch3: { houseCode: 28, unitCode: 20, state: false }
20:43:31.460 [pimatic-homeduino] debug: switch4: { unit: 28, id: 20, state: true }
20:43:31.470 [pimatic-homeduino] debug: switch5: { id: 1043386, unit: 0, all: true, state: false }
20:43:31.480 [pimatic-homeduino] debug: switch7: { unit: 3, id: 2, state: true }
20:43:31.490 [pimatic-homeduino] debug: switch15: { id: 5189, unit: 3, state: false, all: false }
20:43:31.500 [pimatic-homeduino] debug: switch16: { id: 'A', unit: 2, state: false }
20:43:31.510 [pimatic-homeduino] debug: switch19: { id: undefined, unit: undefined, state: undefined }
20:43:31.520 [pimatic-homeduino] debug: pir1: { unit: 28, id: 20, presence: true }
20:43:31.530 [pimatic-homeduino] debug: pir2: { unit: 31, id: 26, presence: true }
20:43:31.539 [pimatic-homeduino] debug: contact2: { id: 1043386, contact: false }
20:43:31.549 [pimatic-homeduino] debug: contact3: { id: 1043386, contact: false }
20:43:31.558 [pimatic-homeduino] debug: led1: { id: 324, command: 'code:01010101' }
20:43:31.568 [pimatic-homeduino] debug: led2: { id: 324, command: 'code:01010101' }
20:43:31.578 [pimatic-homeduino] debug: led3: { id: 324, command: 'code:01010101' }
20:43:31.588 [pimatic-homeduino] debug: led4: { id: 324, command: 'code:01010101' }
Thanks,
fletcher