Hello,
I’m new to Pimatic and want to control several self-learning Jarolift wireless shutters. I know that they are using some rolling code with a secret, so I took an original 4 ch remote, added a PCF8574 (P0…3 connect to the 4 buttons, P4…P7 to the mcus led output) and attached it to the RasPis I2C bus. Using a self written python script I can control the shutters from shell by “python rolladen.py 32 1 -1” where 32 is the address on the I2C bus 1 (0…4, 0=all) the channel and -1/0/1 is down,stop,up.
It there a way to add a shutter control which execs my shell scripts?
Regards, Michael