Hello,
since i haven´t found support for the mostly common device-sensors Oregon, it seems that homeduino doesn´t recognise its protocoll.
I´ve found something on GitHub:
https://github.com/1000io/OregonPi
Maybe someone can adapt this decoder?
Adding support to homeduino for Oregon sensors
Hello,
since i haven´t found support for the mostly common device-sensors Oregon, it seems that homeduino doesn´t recognise its protocoll.
I´ve found something on GitHub:
https://github.com/1000io/OregonPi
Maybe someone can adapt this decoder?
This is more a protocol request as an feature request. I move this topic.
When I have enough time than I can implement this protocols.
pimatic rocks!!!
Can you pls post the debug output from homeduino for this sensors?
pimatic rocks!!!
unfortunately homeduino does not recocnize it !
I tried 3 different sensors… it´s strange ! The other one i have from conrad works…
Do you use the GPIO or the Arduino version?
pimatic rocks!!!
Arduino version
When homeduino don’t show the data then it is really hard to implement this.
Can you connect the arduino to an Windows PC?
pimatic rocks!!!
Yrs i can… what should i do?
Hello,
I do also have an Oregon weather station and would really appreciate an integration in homeduino. Up to now I’m updating my pimatic with a modified version of the OregonPi code doing RESTcalls to pimatic.
I connected my tranceiver with gpio and I’m getting the following output:
http://pastebin.com/d5s3hGjT
Is it only the case here on tablet, that I’m not able to paste something?
Best regregards
Markus
Here is a link to a specification document for the Orgegon Scientific V1, V2 and V3 protocols. All protocol variants use OOK with Manchester coding.
EDIT: Ooops, sorry. Here is the link:
http://wmrx00.sourceforge.net/Arduino/OregonScientific-RF-Protocols.pdf
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@mwittig
Would you be so kind and provide the promised link
I know … its hot in Germany
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
Additionally I can say that I have 3 sensors running with ids 1, 2, 3. Sensor type for channel 1,2 is THGR122N and for channel 3 it is a THGN132N. They are using V2 of the protocol sending temp, hum and battery state.
I followed the oregon thread on pilight forums some time, seems to be tricky to get things running…
Hello together,
my configuration is growing and I’m really glad with pimatic and the possibillities of it.
From my first steps with homeautomation and raspberry I still have a small weatherstation from oregon, type THN 132N. Now I’m searching for an protocoll to implement these station in my pimatic installation.
I’d searched in the forum, but there is no further action to find since these here, ca. 6 month ago, with no really solution.
Is there somebody who had build a solution for this station?
Thanks in advance
Manfred