PIR wired on pin arduino nano

---

Hello,

I have a hc-sr501 PIR and i want to use it like a pir and to be wired on
pin 12 for precense on the arduino nano. Is this possible? In the script of the device i only see UNIT and ID and no PIN.

Thanks gerrit.

@ghv
indeed there’s no PIR protocol for directly attached hardware.
Your above mentioned protocols with option and unit are for RF purpose.
maybe you can try the contact sensor example as workaround, have a look here at the bottom of the page
https://github.com/pimatic/pimatic-homeduino

Thanks for the answer.
It works as a contact but is it possible to change the words OPENED and CLOSED.

thanks gerrit.

@ghv said:

It works as a contact but is it possible to change the words OPENED and CLOSED.

Add the following to the device configuration and change the values to your needs

“xOpenedLabel”: “auf”,
“xClosedLabel”: “zu”,

I have used it and it works great.
Many thanks, gerrit