hi,
i ve this Temp Sensor: TFA Temp Sensor 30.3150
Is it possible to add them to pimatic?
regard
WS Sensor - How can i add a not supported device
hi,
i ve this Temp Sensor: TFA Temp Sensor 30.3150
Is it possible to add them to pimatic?
regard
what does homeduino debug output say?
is there any weather protocol that matches when the device transmits?
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
unfortunately not
dedug is emtpy
is there a transmission button on the sensor?
push it and see what happens.
what receiver do you use?
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
no, this sensor havent it.
on this page
https://github.com/pimatic/rfcontroljs/blob/master/protocols.md
i found that TFA is supported
weather3
Type: weather
Brands: tfa, conrad
Protocol Options:
id (number)
channel (number)
Supports:
temperature
humidity
does your rf receicer work properly and which receiver do you use?!
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
Ah ok, i have seen in another of your posts that you are using an “aukru” receiver. I is it this one here? http://www.amazon.de/Aukru-Superregeneration-Transmitter-Modul-receiver-module-433M-Empfänger-Modul/dp/B00OLI93IC
If yes … throw this piece of crap away as soon as possible and go for a 3400rf / rxb6 receiver.
With the aukru from the amazon link you are having a receiving range of only 50 cm to 100 cm max. So try to move your tfa weather device very close to your receiver and wait for any debug output.
If this works you will see that the receiver has limited range.
Please have a closer look here http://forum.pimatic.org/topic/487/hardware-tip-433-mhz-receiver-for-pimatic
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
yes, i had this receiver but now i use this one:
INHDBOX Geeetech 433Mhz Superheterodyne 3400RF
http://www.amazon.de/gp/product/B00YMMFJJO?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !
yes, receiver works
i bought today a another sensor: TFA 30.3200
works perfect
ok then its the tfa sensor that does not want to talk to pimatic
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !