Dear Willy,
I have used the last protocol you made and it looks great. I have 4 devices. 1/2/3 and 4 for all. Only there is still 1 problem. By device 1/2/3 all the shutters will go up, down and stop.
Thanks gerrit
[Solved] REMOTE SHUTTERS ROHRMOTOR24 - shutter4
Dear Willy,
I have used the last protocol you made and it looks great. I have 4 devices. 1/2/3 and 4 for all. Only there is still 1 problem. By device 1/2/3 all the shutters will go up, down and stop.
Thanks gerrit
@ghv
A new try: shutter4.js
And use in the 4th device “all: true” instead of “channel: 5” (see my changed example above)
Dear Willy,
I have try the new one and it is almost perfect but there are 2 things.From all the 4 devices the stop button dont work. Device 1/2/3 up and down works perfect. Device 4 (all shutters) all shutters will go down but not up. Only the down button works.
Thanks gerrit.
@ghv
Download the file again and test it. The normal channels should move and stop as expected.
Then I need again the debug from the “all” channel (up, down, stop). In your first post the code for stop and down where the same (even the timestamp).
ghv and willy i have seen something strange in here which maybe can be a problem or i could be wrong.
GHV posted in the first post that channel 0 is all shutters… so isnt device 0 channel 0… then in his last post he is having problems with device 4(all shutters) but isnt that device 0??? i hope you got my mind fling
@dyo
He means the 4th device from my example, where i used “all” (channel 0)
Aha ok nevermind then .
Dear Willy,
I have tested the protocol and it works very good. PERFECT.I am verry happy with it.
Many thanks, gerrit.
@ghv
Did you test all the 3 channels plus the “all”?
If yes, i will mark this threat as “solved”