[Solved] Nice shutter device with hand switch option, but wihtout protocol - shutter3

---

Hello everybody
I have now bought this switch with remote control . Unfortunately, with the success I had feared. I can not do anything with the read code.

I have to mention that I now use on Homeduino with an Arduino Nano on RPi.
UP

debug [pimatic-homeduino]: received: [ 280, 448, 732, 1760, 5180, 11160 ] 4302022121212102210221020202020202212102022102212121020221020221210202022121212105
debug [pimatic-homeduino]: data: "RF receive 5180 1760 280 732 448 11160 0 0 0123233434343423342334232323232323343423233423343434232334232334342323233434343425"
debug [pimatic-homeduino]: received: [ 284, 448, 740, 1764, 5204, 10876 ] 4302022121212102210221020202020202212102022102212121020221020221210202022102020225
debug [pimatic-homeduino]: data: "RF receive 5204 1764 284 740 448 10876 0 0 0123233434343423342334232323232323343423233423343434232334232334342323233423232335"

DOWN

debug [pimatic-homeduino]: received: [ 292, 440, 728, 1748, 5044, 11356 ] 4302022121212102210221020202020202212102022102212121020221020221210202212121210205
debug [pimatic-homeduino]: data: "RF receive 5044 1748 292 728 440 11356 0 0 0123233434343423342334232323232323343423233423343434232334232334342323343434342325"
debug [pimatic-homeduino]: received: [ 296, 440, 728, 1756, 5212, 10968 ] 4302022121212102210221020202020202212102022102212121020221020221210202212102022125
debug [pimatic-homeduino]: data: "RF receive 5212 1756 296 728 440 10968 0 0 0123233434343423342334232323232323343423233423343434232334232334342323343423233435"

Can anyone help if and how I can use this code with Homeduino me?

Moved this threat to the rf development section.

@Thrusty
do you have this remote: ebay

Then post also the debug from left, right and stop button.

@Willy I have this item: Ebay for five Shutter- Receiver.
I have post the debug from up and down button in my first Post.
The debug from the stop button is the following:

Stop- button

debug [pimatic-homeduino]: received: [ 296, 444, 732, 1752, 5052, 10928 ] 4302022121212102210221020202020202212102022102212121020221020202210221022102210225
debug [pimatic-homeduino]: data: "RF receive 5052 1752 296 732 444 10928 0 0 0123233434343423342334232323232323343423233423343434232334232323342334233423342335"
debug [pimatic-homeduino]: received: [ 292, 440, 736, 1752, 5212, 10836 ] 4302022121212102210221020202020202212102022102212121020221020202210221022102210225
debug [pimatic-homeduino]: data: "RF receive 5212 1752 292 736 440 10836 0 0 0123233434343423342334232323232323343423233423343434232334232323342334233423342335"
debug [pimatic-homeduino]: received: [ 292, 444, 732, 1596, 5212, 10988 ] 4302022121212102210221020202020202212102022102212121020221020202210221022102210225
debug [pimatic-homeduino]: data: "RF receive 5212 1596 292 732 444 10988 0 0 0123233434343423342334232323232323343423233423343434232334232323342334233423342335"

Sometimes i become various results.

It would be really nice to get a working protocol for this switch.

I think this switch would be for many other interesting because it also with a manual switch.
I tried it and it works really well. With the remote control and manual switch. One should have a deep wallbox, then the wireless switch fits under the hand switch in the wall.

I hope you can help me with the Protocol on.

@Thrusty
The protocol is almost finished.
I need the debug from the other channels as well.
Channel1 up, down, stop
Channel2 up, down, stop
ect.
This is needed to identify the different channels.

Edit:
seems that the stop debug is from a different channel than teh other two.

@Willy Oops, I should have guessed
So again
Ch1 Up

debug [pimatic-homeduino]: received: [ 284, 456, 740, 1752, 5188, 10764 ] 4302022121212102210221020202020202212102022102212121020221020202210202022102020225
15:59:13debug [pimatic-homeduino]: data: "RF receive 5188 1752 284 740 456 10764 0 0 0123233434343423342334232323232323343423233423343434232334232323342323233423232335"

down

debug [pimatic-homeduino]: received: [ 292, 440, 732, 1744, 5044, 11316 ] 4302022121212102210221020202020202212102022102212121020221020202210202212121210205
16:00:14debug [pimatic-homeduino]: data: "RF receive 5044 1744 292 732 440 11316 0 0 0123233434343423342334232323232323343423233423343434232334232323342323343434342325"

Stop

16:01:11debug [pimatic-homeduino]: data: "RF receive 5196 1748 292 732 444 10844 0 0 0123233434343423342334232323232323343423233423343434232334232323342334233423342335"

Ch2 up

16:02:24debug [pimatic-homeduino]: data: "RF receive 5196 1748 296 732 436 11176 0 0 0123233434343423342334232323232323343423233423343434232334232334232323233434343425"

down

16:03:09debug [pimatic-homeduino]: data: "RF receive 5184 1748 292 732 444 10792 0 0 0123233434343423342334232323232323343423233423343434232334232334232323343423233435"

stop

16:03:39debug [pimatic-homeduino]: data: "RF receive 5192 1596 296 732 440 10972 0 0 0123233434343423342334232323232323343423233423343434232334232334232334233423342335"

Ch3 up

16:04:18debug [pimatic-homeduino]: data: "RF receive 5192 1604 288 736 448 10756 0 0 0123233434343423342334232323232323343423233423343434232334232334342323233423232335"

down

16:04:50debug [pimatic-homeduino]: data: "RF receive 5188 1756 288 728 444 11172 0 0 0123233434343423342334232323232323343423233423343434232334232334342323343434342325"

stop

16:05:25debug [pimatic-homeduino]: data: "RF receive 5212 1756 292 732 444 10840 0 0 0123233434343423342334232323232323343423233423343434232334232334342334233423342335"

Ch4 up

16:06:19debug [pimatic-homeduino]: data: "RF receive 5224 1592 300 740 436 10820 0 0 0123233434343423342334232323232323343423233423343434232334233423232323233423232335"

down

16:07:15debug [pimatic-homeduino]: data: "RF receive 5192 1752 288 732 448 11172 0 0 0123233434343423342334232323232323343423233423343434232334233423232323343434342325"

stop

16:07:59debug [pimatic-homeduino]: data: "RF receive 5204 1600 288 736 444 10896 0 0 0123233434343423342334232323232323343423233423343434232334233423232334233423342335"

Ch5 up

16:08:40debug [pimatic-homeduino]: data: "RF receive 5216 1748 296 736 436 10840 0 0 0123233434343423342334232323232323343423233423343434232334233423342323233423232335"

down

16:09:28debug [pimatic-homeduino]: data: "RF receive 5184 1600 288 732 448 11092 0 0 0123233434343423342334232323232323343423233423343434232334233423342323343423233435"

stop

16:10:04debug [pimatic-homeduino]: data: "RF receive 5188 1756 288 732 448 10776 0 0 0123233434343423342334232323232323343423233423343434232334233423342334233423342335"

So I’ve probably read all options and post it now.
I hope there is a way to use RPI and Homeduino.

@Thrusty
will have a look for this in the evening. Now searching for a cold place

@Thrusty
Hi,
try this:
controller.js
shutter3.js

@Willy Thanks for your work. but unfortunately I do not know how I can put this script in pimatic.
Is there a HOTOW or can help because you me?

@Thrusty
Stop pimatic
Copy “shutter3.js” to "/home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/rfcontroljs/lib/protocols"
Copy “controller.js” to “/home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/rfcontroljs/lib” (first backup the old file)

Insert a device like this:

{
  "id": "rolladen",
  "name": "Rolladen",
  "class": "HomeduinoRFButtonsDevice",
  "buttons": [
    {
      "id": "roll1",
      "text": "Rauf",
      "protocols": [
        {
          "name": "shutter3",
          "options": {
            "id": 128457074,
            "unit": 1,
            "command": "up"
          }
        }
      ]
    },
    {
      "id": "roll2",
      "text": "Stop",
      "protocols": [
        {
          "name": "shutter3",
          "options": {
            "id": 128457074,
            "unit": 1,
            "command": "stop"
          }
        }
      ]
    },
    {
      "id": "roll3",
      "text": "Runter",
      "protocols": [
        {
          "name": "shutter3",
          "options": {
            "id": 128457074,
            "unit": 1,
            "command": "down"
          }
        }
      ]
    }
  ]
}

Start pimatic

Insert the new device to a page

Now Shutter1 should move in the right direction.
If this is working i would like to do some other tests because your switch can learn remotes. But first this has to work.

@Willy thanks, but i think i have a other problem in the moment. It looks if as will die my SD Card. First i will fixed this problem.
And then i can test the new shutter .
Then i will tell from my results.

OK, will wait for your answer

@Willy Hi, now the pimatic is running again, with USB-HDD
I insert the controller.js, the shutter.js and the lines in the config.json.
But i become this message in the pimatic-log:

17:53:48.898 [pimatic] info: Loading plugin: "pimatic-homeduino" (0.8.53)
17:53:53.342 [pimatic] error: Unexpected token <
....
17:53:53.960 [pimatic] warn: no plugin found for device "rolladen" of class "HomeduinoRFButtonsDevice"!

Witch token is meant?
I do not get the following message:

[pimatic-homeduino] info: Connected to homeduino device.

Could be due to the file it controller.js?
When I use the old controller.js again , then I get the message "Connected to homeduino Device " again .

@Thrusty
Hi,
you are now on the newest homeduino. So we need some files more (download all, even you have them):
awning2.js
shutter2.js
shutter3.js

controller.js

Post your success or non success

@Willy
Oh, nice and fast reaktion with new files.
I will test it tomoro in the morning so i can 😴
Now i go work 😁

@Willy Morning, i have tested the new versions of the 4 files. But unfortunately without success.

07:26:01.171 [pimatic] info: Loading plugin: "pimatic-homeduino" (0.8.53)
07:26:05.800 [pimatic] error: Unexpected token <
07:26:05.827 [pimatic-cron] info: the time is: Fri Jun 12 2015 07:26:05 GMT+0200 (CEST)
07:26:06.602 [pimatic] info: New device "Fritz outlet"...
07:26:06.681 [pimatic] warn: no plugin found for device "rolladen" of class "HomeduinoRFButtonsDevice"!

I get the same mistake as yesterday.
I noticed that even the " HomeduinoRFSwitch " no longer work with the new scripts.

Hi,
post the “config.json”. I think there is a error in the config.
Delete all your passwords first.

@Willy Hi,

{
  "settings": {
    "httpServer": {
      "enabled": true,
      "port": 80,
      "logLevel": "debug",
      "debug": "true"
    },
    "database": {
      "deviceAttributeLogging": [
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "*",
          "interval": "0",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "continuous",
          "interval": "5min",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "temperature",
          "type": "number",
          "expire": "1y"
        },
        {
          "deviceId": "*",
          "attributeName": "humidity",
          "type": "number",
          "expire": "1y"
        }
      ],
      "messageLogging": [
        {
          "level": "*",
          "tags": [],
          "expire": "7d"
        },
        {
          "level": "debug",
          "tags": [],
          "expire": "0"
        }
      ]
    },
    "authentication": {
      "secret": "xxxxxxxxxxxxxxxxxxxxxxxx"
    },
    "httpsServer": {},
    "gui": {}
  },
  "plugins": [
    {
      "plugin": "cron"
    },
    {
      "plugin": "shell-execute"
    },
    {
      "plugin": "mobile-frontend"
    },
    {
      "plugin": "fritz",
      "url": "http://fritz.box",
      "user": "xxxxxxxxxx",
      "password": "xxxxxxxxxx",
      "interval": 60
    },
    {
      "plugin": "homeduino",
      "driver": "serialport",
      "driverOptions": {
        "serialDevice": "/dev/ttyUSB0",
        "baudrate": 115200
      },
      "receiverPin": 0,
      "transmitterPin": 4
    }
  ],
  "devices": [
    {
      "id": "home-switch",
      "name": "Fritz outlet",
      "class": "FritzOutlet",
      "ain": "xxxxxxxxxxxxxxx"
    },
    {
      "id": "sonnenstand",
      "name": "Sonne",
      "class": "ShellSensor",
      "attributeName": "time",
      "attributeType": "string",
      "attributeUnit": "",
      "command": "sudo bash /home/pi/sunrise.sh",
      "interval": 3600000
    },
    {
      "id": "rolladen",
      "name": "Rolladen",
      "class": "HomeduinoRFButtonsDevice",
      "buttons": [
        {
          "id": "roll1",
          "text": "Rauf",
          "protocols": [
            {
              "name": "shutter3",
              "options": {
                "id": 128457074,
                "unit": 1,
                "command": "up"
              }
            }
          ]
        },
        {
          "id": "roll2",
          "text": "Stop",
          "protocols": [
            {
              "name": "shutter3",
              "options": {
                "id": 128457074,
                "unit": 1,
                "command": "stop"
              }
            }
          ]
        },
        {
          "id": "roll3",
          "text": "Runter",
          "protocols": [
            {
              "name": "shutter3",
              "options": {
                "id": 128457074,
                "unit": 1,
                "command": "down"
              }
            }
          ]
        }
      ]
    }
  ],
  "rules": [],
  "pages": [
    {
      "id": "favourite",
      "name": "Favourites",
      "devices": [
        {
          "deviceId": "home-switch"
        },
        {
          "deviceId": "sonnenstand"
        }
      ]
    }
  ],
  "groups": [],
  "users": [
    {
      "username": "admin",
      "password": "xxxxxxxxxxx",
      "role": "admin"
    }
  ],
  "roles": [
    {
      "name": "admin",
      "permissions": {
        "pages": "write",
        "rules": "write",
        "variables": "write",
        "messages": "write",
        "events": "write",
        "devices": "write",
        "groups": "write",
        "plugins": "write",
        "updates": "write",
        "config": "write",
        "database": "write",
        "controlDevices": true,
        "restart": true
      }
    }
  ],
  "variables": []
}

@Willy Hi Willy,
it works
Thanks, very very much.
The problem was the copying files.
With copy/past its all good.
Now i will see how do I get more switches