Hello Guys!
I have a problem with the PIR1000 from Intertechno. I have two of them in my floor to switch a Lamp on and off. This works perfect.
I also will use the PIR, to monitor my House, when I’m not at home, with this little rule:
IF Bewegungsmelder Flur signals present and $weristzuhause.Wer ist zu Hause = "Niemand"
pushover title:“Hausalarm” message:“Der Bewegtungsmelder hat angesprochen, es ist aber keiner zu Hause” priority:1
My config looks like this:
{
"id": "bewegungsmelder-flur",
"name": "Bewegungsmelder Flur",
"class": "HomeduinoRFPir",
"protocols": [
{
"name": "pir5",
"options": {
"unit": 9,
"id": 14289546
}
}
],
"resetTime": 6000
}
When I take a look into the debug I can only see the PIR, when I take the little switch on the PIR from “del” to “set”.
Here is the output from the debug:
debug [pimatic-homeduino]: contact1: { id: 14289546, all: false, contact: false, unit: 9 }
debug [pimatic-homeduino]: pir5: { id: 14289546, all: false, presence: true, unit: 9 }
debug [pimatic-homeduino]: switch1: { id: 14289546, all: false, state: true, unit: 9 }
debug [pimatic-homeduino]: received: [ 136, 218, 342, 1140, 2632, 9524 ] 141113111313121312121313121312111313121113111312131213121313121213131212031312121311131213131212131312121312131312131212131113131115
debug [pimatic-homeduino]: data: “RF receive 218 2632 1140 342 136 9524 0 0 010002000202030203030202030203000202030002000203020302030202030302020303420203030200020302020303020203030203020203020303020002020005”
When I release the PIR of the normal way ( dancing in the front of them ) I can’t see anything in the debug and the Rule dosn’t work.
Has anyone experience with the PIR and can help me?
Thanks in advance
Skarhand