Hi guys,
since I broke my Nano, I tried to flash Homeduino on a new one.
Unfortunately it doesn’t work anymore.
I am using one of those Nanos:
https://www.amazon.de/Elegoo-Kompatibles-Board-ATmega328P-Version/dp/B0725CFKWK/ref=sr_1_3?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=Elegoo+Nano+V3+Entwicklerboard+für+Arduino+Atmega328P+CH340+Chip+(3er+Board+Set)&qid=1615236494&sr=8-3
Maybe one of you has an idea…
Output:
-------------------------
Arduino.mk Configuration:
- [AUTODETECTED] CURRENT_OS = LINUX
- [USER] ARDMK_DIR = /home/pi/homeduino/arduino-mk
- [AUTODETECTED] ARDUINO_DIR = /usr/share/arduino
- [AUTODETECTED] ARDUINO_VERSION = 105
- [DEFAULT] ARCHITECTURE =
- [DEFAULT] VENDOR = arduino
- [DEFAULT] ARDUINO_SKETCHBOOK = /root/sketchbook
- [BUNDLED] AVR_TOOLS_DIR = /usr/share/arduino/hardware/tools/avr (in Arduino distribution)
- [COMPUTED] ARDUINO_LIB_PATH = /usr/share/arduino/libraries (from ARD UINO_DIR)
- [DEFAULT] ARDUINO_CORE_PATH = /usr/share/arduino/hardware/arduino// cores/arduino
- [COMPUTED] ARDUINO_VAR_PATH = /usr/share/arduino/hardware/arduino//v ariants (from ARDUINO_DIR)
- [COMPUTED] BOARDS_TXT = /usr/share/arduino/hardware/arduino//boards. txt (from ARDUINO_DIR)
- [USER] USER_LIB_PATH = /home/pi/homeduino/libraries
- [DEFAULT] PRE_BUILD_HOOK = pre-build-hook.sh
- [USER] BOARD_TAG = nano328
- [COMPUTED] OBJDIR = build-nano328 (from BOARD_TAG)
- [DETECTED] MONITOR_BAUDRATE = 115200 (in sketch)
- [DEFAULT] OPTIMIZATION_LEVEL = s
- [DEFAULT] MCU_FLAG_NAME = mmcu
- [DEFAULT] CFLAGS_STD =
- [DEFAULT] CXXFLAGS_STD =
- [COMPUTED] DEVICE_PATH = /dev/ttyUSB0 (from MONITOR_PORT)
- [AUTODETECTED] Size utility: AVR-aware for enhanced output
-
- ARDUINO_LIBS =
- [USER] SerialCommand
- [USER] RFControl
- [USER] Keypad
- [USER] DHTlib
- [USER] Keypad/utility
- [COMPUTED] BOOTLOADER_PARENT = /usr/share/arduino/hardware/arduino// bootloaders (from ARDUINO_DIR)
- [COMPUTED] ARDMK_VERSION = 1.3.4
- [COMPUTED] CC_VERSION = 5.4.0 (avr-gcc)
-------------------------
mkdir -p build-nano328
make reset
make[1]: Verzeichnis „/home/pi/homeduino“ wird betreten
/home/pi/homeduino/arduino-mk/bin/ard-reset-arduino /dev/ttyUSB0
make[1]: Verzeichnis „/home/pi/homeduino“ wird verlassen
make do_upload
make[1]: Verzeichnis „/home/pi/homeduino“ wird betreten
/usr/share/arduino/hardware/tools/avr/../avrdude -q -V -D -p atmega328p -C /usr/ share/arduino/hardware/tools/avr/../avrdude.conf -c arduino -b 57600 -P /dev/tty USB0 \
-U flash:w:build-nano328/homeduino.hex:i
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
avrdude done. Thank you.
make[1]: *** [/home/pi/homeduino/arduino-mk/Arduino.mk:1292: do_upload] Fehler 1
make[1]: Verzeichnis „/home/pi/homeduino“ wird verlassen
make: *** [/home/pi/homeduino/arduino-mk/Arduino.mk:1285: upload] Fehler 2
