Kostal Inverter data

---

I only came to test it today. Release 0.0.12 behaves exactly like 0.0.11, no values …
What do you mean with “startscreen when I go to the inverter ip?”

Whne you go with a browser to the inverter ip, what do you see?

And 2 remarks on the config

• your inverter must be in the same subnet as your pimatic is
• the local ip address in the config is just the numbers like 192.168.xx.yy

IPs are in the same subnet.
I am beginning to think where the problem lies. SMA inverters of the old generation, like my SunnyBoy TL5000, do not allow direct access to a web interface. They don’t have one at all. Only the newer generation of devices like Sunny Boy 3.0 … 5.0 have an integrated web server for configuration.
The devices of the old generation can only be addressed via a specific protocol and read out via third-party applications such as SBFspot.

Yes i use the web interface for the plugin.
That explains it.

If you want, I can look into the sbfspot way and see if it can be added.

That would be great!

This is a good place to start : https://www.sma.de/produkte/sma-developer.html Look for SEMP protocol

Do you have modbus on your inverter?

No, I don’t have Modbus on my inverter. The Inverter (and the battery inverter too) has an ethernet interface, called Speedwire/Webconnect module (SMA SWDM-10).

Sma speedwire has its own dhcp server and is probably on a different subnet.
Is that the case in your setup?

No, I don’t think so. I configured all the PV systems (inverter, battery inverter, energy meter, home manager) with static IPs of the same subnet (192.168.1.x) . SBFspot works with the static IP of the inverter. I will stick to this solution.