I just got a Tuya/Jinvoo ZigBee curtain switch (SM-SW101-ZC) to test if I can use it for my shutters.
I was able to get it binded via Phoscon to the ConBee II stick as a lamp (discovered as ‘Window covering device’ from Heiman, model: TS0302) and afterwards also discovered by Pimatic as device.
My problem is now, that in the device list of the Raspbee devices, there is no shutter.
I took the dimmer-device and was able to read the ‘status’:
Looks like pressing on the device’s button Up = 100%, Stop button = 50% and Down button = 0% = Off. So getting values from the devices seems working.
But it doesn’t work the other way round. Pressing buttons in Pimatic, resp. moving the slider of the dimmer device only feedbacks error messages (=‘bad request’).
Has someone an idea how this can be tackled, e. g. integration of a shutter in the RaspBee plugin?
Thanks in advance for a response
ZigBee Shutter Control not working - missing RaspBee Shutter Device
I meanwhile verified, that the shutter-switch is propperly working directly from the deCONZ GUI.
So it seems at leat really ‘only’ to be an Pimatic raspbee integration-gap