pimatic-hap@0.13.0

---

Finally a new release after a few months of silence:

• #85 Support for RaspBeeMultiDevice (Aqara door/window sensors)
• Support for additional attributes (presence, contact, water, carbon, lux, fire)
• Update to hap-nodejs 0.6.11, this drops support for nodejs < 8
• Debug logging in hap-nodejs must be enabled by environment variable due to updated dependency.
• Generate pin code on startup if no pincode found in config, or pincode is invalid

Note that this release needs at least nodejs version 8. I hope that my latest PR to pimatic gets released so you can also stick with 0.12.x. Please note that I don’t plan to support 0.12.x anymore. So please update to a newer nodejs version to get the latest updates.

After updating to version 0.13.0 no device in the homekit app is responding. Is it necessary to delete the hap-database and reconfigure all devices in the homekit app?

Regards, daice

@daice During my tests I didn’t have to delete the database. Did you check if the plugin successfully started?

I think it has started successfully.

10:31:55.695 [pimatic-hap] debug: publishing homekit bridge on port 51826
10:31:55.699 [pimatic-hap] debug: pincode is: 031-45-156

If you don’t have any rooms or automations in your Home app its the easiest to delete the hap-database folder. I guess you already tried to restart pimatic?

Restart does’t help. I will delete the database and reconfigure all again.

@daice which node version are you using?

node --version
v10.16.3

After deleting the hap-database an reconfiguring the HomeKit app, it is working fine again.

That’s strange. Did anyone else have problems after the update?

Nah, it’s still fine for me (nodejs v10.20.1)

Upgraded today to hap 0.13.0. After restarting I got the error at compiling time: Block-scoped declarations (let, const, function, class) not yet supported outside strict mode
10:19:40.011 [pimatic] debug: SyntaxError: Block-scoped declarations (let, const, function, class) not yet supported outside strict mode

I’m using pimatic version 0.9.54. NPM Version 2.15.11. nodjs version 0.10.29

Any ideas to solve my problem? Thanks!

@vivathan as stated in the first post of this thread support for nodejs < 8 was dropped. Not sure which version you are using. There is no version 0.10.29

@michbeck100 this version is shown if I enter nodejs -v as v0.10.29 - so I assume this is version 10.29 and > 8.

@vivathan actually no, your version is from 2014: https://nodejs.org/en/blog/release/v0.10.29/

@michbeck100 shame over me . Yes - you are right.

I did a complete new installation as described in the Getting Started Guide. I installed node version v12.19.0 as described. After I installed pimatic (also as described) I started pimatic with the default config file. As soon as the database was build, I got the following error message. Any idea what’s going wrong? Also what’s strange is sqlite3@4.0.9 node_modules…in the log?

15:58:51.848 [pimatic, ppm] sqlite3@4.0.9 node_modules/sqlite3
15:58:51.849 [pimatic, ppm] ├── nan@2.14.2
15:58:51.851 [pimatic, ppm] └── node-pre-gyp@0.11.0 (semver@5.7.1, detect-libc@1.0.3, mkdirp@0.5.5, tar@4.4.13, nopt@4.0.3, rc@1.2.8, npm-packlist@1.4.8, rimraf@2.7.1, needle@2.5.2, npmlog@4.1.2)
Knex: run
$ npm install sqlite3 --save
Error: Cannot find module 'sqlite3’
Require stack:

• /home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/dialects/sqlite3/index.js
• /home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/index.js
• /home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/knex.js
• /home/pi/pimatic-app/node_modules/pimatic/lib/database.coffee
• /home/pi/pimatic-app/node_modules/pimatic/startup.coffee
• /home/pi/pimatic-app/node_modules/pimatic/pimatic.js
  at Function.Module._resolveFilename (internal/modules/cjs/loader.js:831:15)
  at Function.Module._resolveFilename (/home/pi/pimatic-app/node_modules/pimatic/node_modules/module-alias/index.js:49:29)
  at Function.Module._load (internal/modules/cjs/loader.js:687:27)
  at Module.require (internal/modules/cjs/loader.js:903:19)
  at require (internal/modules/cjs/helpers.js:74:18)
  at Client_SQLite3._driver (/home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/dialects/sqlite3/index.js:75:12)
  at Client_SQLite3.initializeDriver (/home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/client.js:219:26)
  at Client_SQLite3.Client (/home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/client.js:113:10)
  at new Client_SQLite3 (/home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/dialects/sqlite3/index.js:58:20)
  at Knex (/home/pi/pimatic-app/node_modules/pimatic/node_modules/knex/lib/index.js:60:34)
  at /home/pi/pimatic-app/node_modules/pimatic/lib/database.coffee:79:17
  at tryCatcher (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/util.js:16:23)
  at Promise._settlePromiseFromHandler (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/promise.js:517:31)
  at Promise._settlePromise (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/promise.js:574:18)
  at Promise._settlePromise0 (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/promise.js:619:10)
  at Promise._settlePromises (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/promise.js:699:18)
  at _drainQueueStep (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/async.js:138:12)
  at _drainQueue (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/async.js:131:9)
  at Async._drainQueues (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/async.js:147:5)
  at Immediate.Async.drainQueues [as _onImmediate] (/home/pi/pimatic-app/node_modules/pimatic/node_modules/bluebird/js/release/async.js:17:14)
  at processImmediate (internal/timers.js:461:21)*

@vivathan sqlite3 is installed during startup. So you don’t have to install it on your. Normally pimatic will install it automatically.

@michbeck100 I didn’t install sqlite3 by myself. This is the error log as soon i have started pimatic the first time with sudo node_modules/pimatic/pimatic.js

@vivathan said in pimatic-hap@0.13.0:

Getting Started Guide

What ‘Getting starting guide’ did you use?

@bertreb this one: Pimatic Installation

Ok, thats the right one. Could you try to use node 10.22.1?