Hi, what type of Shelly are you using?
-
The Dimmer is named: ShellyDimmer"
Smart Wifi LED Dimmer.That’s all on information on the description.
-
Yes, this one.
-
This dimmer is controlled via web interface or mqtt.
Do you need to get info from the dimmer? If not you can leave the state topic field blank and the error should not come back. -
The dimmer in my config is controlled via mqtt.
Will I get the dimmer % in my visualization when I leave the state topic blanc ?
I do not need any other information from the dimmer.
If not, it is not the way that I would like to go.regards
Manfred -
Of course, I would like to see the information in my GUI.
Actual I own 2 dimmer from shelly and both a fix installed in my house. So I actual I can’t give a test-dimmer to you.
Perhaps in a few days, I’m waiting for some parts from allterco robotics. In the meantime I will disable the stat topic.
Thanks again for your support. When I’m able to give you new information I will give it to you. -
@bertreb said in Some problems with Shelly Dimmer configuration with new installation on raspi4:
The dimmer value is already available via the slider.
If you check <dimmer-device-name>.dimlevel you see the dimlevel/brightness value of your dimmer.Sorry, I didn’t see that this was a question.
Yes, actual I can see the dimmlevel and also I can adjust it. The only Problem is, that every 30 sec the error message occur.