robotic vacuum ecovacs-deebot ozmo 950 and etc

---

Hi,

I have updated to 0.0.9 and the same effect by version 0.0.8

Can I test something locally myself? For single room cleaning? What can help you?

I assume you programmed the deebot with room numbers?
The next step is to use ( ) as delimiter for the list.
You can test 0.0.10

Ok. Not work.

The deebot ist Orginal programmed with room names with a, b, c

The api wirte this with numbers. I can test with a, b, c

You musst change the config to use a, b, c, to try this

Ok next try with version 0.0.11

Hi,

i have open a ticket here

https://github.com/mrbungle64/ecovacs-deebot.js/issues/13

and the doku is wrong

This work on the console:

vacbot.run(“SpotArea”, “start”, “3”);

Ok thanks its not the only doku error
version 0.0.12 should work

not work, it only starts a auto cleaning.
Pleas can check

and when you use vacbot.run(“SpotArea”, “start”, “3”) is starts in the right room?

@bertreb said in robotic vacuum ecovacs-deebot ozmo 950 and etc:

and when you use vacbot.run(“SpotArea”, “start”, “3”) is starts in the right room?

yes.

i can see direct in the app the room marked and the robot drive in this room

Version 0.0.13 could possibly work

@bertreb said in robotic vacuum ecovacs-deebot ozmo 950 and etc:

Version 0.0.13 could possibly work

Yes now work all Fine

thank you very Match

finally i can tell alexa what to clean

Hi, that looks good. So the room cleaning is working?
If it is handy i could make also the option to use a variable for the room(s) to clean
This looks like
deebot <device id> clean $rooms-to-clean

$rooms-to-clean is a variable with the format for the rooms (list with comma’s)

You can test the rooms variable in version 0.0.14

Hi,

Yes Version 0.0.13 work fine with room cleaning

In the app is the Room in a, b, c
A=0
B=1
C=2
…

For me is the plugin so ok 👌

I test later the v 0.0.14

Can you set the reconnect time from 10min to 2-3min? From time to time it happens that the ecovacs server does not respond. This is also the case in the smartphone app. After restarting the app, it usually works the same again

Hi, yes I used the a, b, c format for the rooms variable
The reconnect timer is set to 2 minutes in version 0.0.15

Ok.

And the variable is a,b,c and transfer later to 1,2,3 to the api call?

I on work and can test later

Yes the values are 1-to-1. I format the input string to be exactly 2, 4, 5, etc in the command towards deebot.
In the roomvariable you can use 2,4,5,…

So,
Work fine with the rule and the variable

Thanks

Hi,

Can you please update the package
To 0.3.4 https://www.npmjs.com/package/ecovacs-deebot

Have a lot off new features
GetPos
setCleanSpeed standardized to numeric 1-4
Can implement pleas the set clean speed

Thank you

The setCleanspeed is a setting for the vacuum ventiltor (intensity of the the Fan).
Is that what you mean?