see english version below
Hallo zusammen,
versuche nun schon seit gefühlt 20 Neuinstallationen folgende Anforderung zum Laufen zu bekommen.
Möchte 433Mhz Außensensoren mit pimatic auslesen, das gelingt mir auch “zeitweise”.
Ich laufe immer wieder auf folgenden Fehler:
[pimatic-homeduino] data: "2019-11-24 10:39:17 sigHandler: Unhandled signal 11, terminating"
Habe einen Raspberry Pi 2 (als Testsystem)
433Mhz Empfänger: RXB6
Habe es mit folgenden OS probiert:
- Jessie, Stretch und Buster
Habe es mit folgenden Node Versionen probiert:
- 4.6.2
- 6.3.0
- 8.1.0
immer das gleiche Ergebnis.
Logs:
10:46:06.026 2019-11-24 Sunday
10:46:16.821 [pimatic] Starting pimatic version 0.9.53
10:46:16.839 [pimatic] Node.js version 8.1.0
10:46:16.841 [pimatic] OpenSSL version 1.0.2l
10:46:21.207 [pimatic, ppm] 2.15.12
10:46:21.269 [pimatic] Loading plugin: "pimatic-cron" (0.8.8)
10:46:22.183 [pimatic] Loading plugin: "pimatic-mobile-frontend" (0.9.16)
10:46:23.690 [pimatic] Loading plugin: "pimatic-homeduino" (0.9.18)
10:46:25.063 [pimatic-cron] the time is: Sun Nov 24 2019 10:46:25 GMT+0000 (UTC)
10:46:26.472 [pimatic-mobile-frontend] packing static assets
10:46:27.594 [pimatic-mobile-frontend] packing static assets finished
10:46:27.609 [pimatic-mobile-frontend] rendering html
10:46:39.568 [pimatic-mobile-frontend] rendering html finished
10:46:39.630 [pimatic] Listening for HTTP-request on port 80...
10:46:39.650 [pimatic-homeduino] data: "ready"
10:46:39.673 [pimatic-homeduino] Connected to homeduino device.
10:46:39.714 [pimatic-homeduino] data: "ACK"
10:46:39.719 [pimatic-homeduino] data: "2019-11-24 10:46:39 sigHandler: Unhandled signal 11, terminating"
unknown message received: 2019-11-24 10:46:39 sigHandler: Unhandled signal 11, terminating
10:46:39.724 [pimatic-homeduino] data: ""
unknown message received:
10:46:39.734 [pimatic-homeduino] Receiving on pin 17
Hat jemand einen Tipp für mich?
Danke und Gruß
AxLED
english version
Hello everybody,
now try to get (with felt 20 new installations) the following requirement up and running.
i would like to read 433Mhz outdoor sensors with pimatic, I succeed also “temporarily”.
I keep running on the following error:
[pimatic-homeduino] data: "2019-11-24 10:39:17 sigHandler: Unhandled signal 11, terminating"
Have a Raspberry Pi 2 (as a test system)
433Mhz receiver: RXB6
Have tried it with the following OS:
- Jessie, Stretch and Buster
I tried the following Node versions:
- 4.6.2
- 6.3.0
- 8.1.0
always the same result.
Logs:
10:46:06.026 2019-11-24 Sunday
10:46:16.821 [pimatic] Starting pimatic version 0.9.53
10:46:16.839 [pimatic] Node.js version 8.1.0
10:46:16.841 [pimatic] OpenSSL version 1.0.2l
10:46:21.207 [pimatic, ppm] 2.15.12
10:46:21.269 [pimatic] Loading plugin: "pimatic-cron" (0.8.8)
10:46:22.183 [pimatic] Loading plugin: "pimatic-mobile-frontend" (0.9.16)
10:46:23.690 [pimatic] Loading plugin: "pimatic-homeduino" (0.9.18)
10:46:25.063 [pimatic-cron] the time is: Sun Nov 24 2019 10:46:25 GMT+0000 (UTC)
10:46:26.472 [pimatic-mobile-frontend] packing static assets
10:46:27.594 [pimatic-mobile-frontend] packing static assets finished
10:46:27.609 [pimatic-mobile-frontend] rendering html
10:46:39.568 [pimatic-mobile-frontend] rendering html finished
10:46:39.630 [pimatic] Listening for HTTP-request on port 80...
10:46:39.650 [pimatic-homeduino] data: "ready"
10:46:39.673 [pimatic-homeduino] Connected to homeduino device.
10:46:39.714 [pimatic-homeduino] data: "ACK"
10:46:39.719 [pimatic-homeduino] data: "2019-11-24 10:46:39 sigHandler: Unhandled signal 11, terminating"
unknown message received: 2019-11-24 10:46:39 sigHandler: Unhandled signal 11, terminating
10:46:39.724 [pimatic-homeduino] data: ""
unknown message received:
10:46:39.734 [pimatic-homeduino] Receiving on pin 17
Does anyone have a tip for me?
Thanks and regards
axled