Hello,
I discover Pimatic, which seems to me ideal for MySensors with a custom application.
But I have some installation problems. As much as I think I understand the principle (great because available !!) of management MySensors, so I blocked the installation. It seems that we should not copy the default config?
Will he Another thing to know when you start in Pimatic?
I made the mistake of following the installation step by step, so with the default config, I’ll start again at the beginning, but other than skip this step, what you need to know when you are a beginner?
thank you
Sincerely,
Alain
-
Installing Pimatic beginner
-
@Alain69
Hello Alain,
all you need for installing Pimatic can be found here at the Howto
Follow these steps one by one and your Pimatic will run from scratch.
It is necessary to copy the config_default.json and rename it to config.json (unless you don’t have a backup of an previous installation), see step no.9 from the above tutorial which describes the command :
9.) cp node_modules/pimatic/config_default.json config.json
Then you will have to edit the config.json and put in a password for the admin, otherwise Pimatic won’t start.pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
Hello,
Thank you for this quick response.
Pimatic parfaitementà seems to fit my research remains to see how it works
Sincerely,
Alain -
@leader21 I think all commands to rpi should be via sudo in howto.
-
@lcf_m
sure you can do so. but it’s not necessary for the wget commands for example.
did you have any issues with the installation as described?pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
@leader21 with command cp config. without sudo - the file is not copied
-
Ok I changed that. Thanks for the hint
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !