Xiaomi Aquara Switch and switch / state

---

Hi,
i have installed a Zigbee Xiaomi Aquara button with Raspbee in Pimatic. This changes the state value to 102 when actuated. How can I switch a lamp on and off when actuated? With my 2 rules the lamps go on and off again.
Thank you for your ideas.

{
  "id": "id-terrassenlicht-xiaomi",
  "name": "Terrassenlicht Xiaomi",
  "rule": "when $id-raspbee_ae6c96f02ceb8aa14d3d0f9be95867d9.state changes and 💡 Terrassenlicht is turned on then switch 💡 Terrassenlicht off",
  "active": true,
  "logging": true
},

{
  "id": "id-terrassenlicht-xiaomi-2",
  "name": "Terrassenlicht Xiaomi 2",
  "rule": "when $id-raspbee_ae6c96f02ceb8aa14d3d0f9be95867d9.state changes and 💡 Terrassenlicht is turned off then switch 💡 Terrassenlicht on",
  "active": true,
  "logging": true
}

I think the state gets not updated fast enough. Use something like
when $id-raspbee_ae6c96f02ceb8aa14d3d0f9be95867d9.state changes and 💡 Terrassenlicht is turned on for 1000ms then switch 💡 Terrassenlicht off

or handle it by one rule

when $id-raspbee_ae6c96f02ceb8aa14d3d0f9be95867d9.state changes then toggle 💡 Terrassenlicht

Hi,
it works, the miracle word is “toggle.” You never stop learning. I had tried it with “change”
Have a nice Sunday!