Pimatic and em-pm2 socket

---

Hallo,

I have a big Problem. My Raspberry Pi 3 is Running with raspbian stretch lite and pimatic inkl. Sispmctl Plugin. I have many hours of Google behind me but my enerGeni EG-PM2 dosent work. (No usb Connection)

Sry for my Bad englisch

Works for me (RPi 3/Stretch). What I did:

sudo apt-get install libusb-dev
# download sispmctl-4.1.tar.gz from sourceforge
tar xzvf  sispmctl-4.1.tar.gz
cd sispmctl-4.1/
./configure
make
sudo make install

At this point the sispmctl should work, however, in my setup it cannot find shared object libsispmctl.so.0 as /usr/local/lib/is not configured as a default search path for libraries. You can do so by editing /etc/ld.so.conf, for example:

# you may also use another text editor like nano
sudo vi /etc/ld.so.conf

and add the following line and save:

include /usr/local/lib

Now, call ldconfig as follows:

sudo ldconfig

Then try sispmctl

 sudo sispmctl

SiS PM Control for Linux 4.1

(C) 2015-2018, Heinrich Schuchardt <xypron.glpk@gmx.de>
(C) 2011-2016, Pete Hildebrandt <send2ph@gmail.com>
(C) 2004-2011, Mondrian Nuessle
(C) 2005-2006, Andreas Neuper
(C) 2010, Olivier Matheret for the planning part

This program comes with ABSOLUTELY NO WARRANTY.

You may re-distribute it under the terms of the
GNU General Public License version 2 or later.

sispmctl -s
sispmctl [-q] [-n] [-d 0...] [-D ...] -b <on|off>
sispmctl [-q] [-n] [-d 0...] [-D ...] -[o|f|t|g|m] 1..4|all
sispmctl [-q] [-n] [-d 0...] [-D ...] -[a|A] 1..4|all [--Aat '...'] [--Aafter ...] [--Ado <on|off>] ... [--Aloop ...]
   'v'   - print version & copyright
   'h'   - print this usage information
   's'   - scan for supported GEMBIRD devices
   'b'   - switch buzzer on or off
   'o'   - switch outlet(s) on
   'f'   - switch outlet(s) off
   't'   - toggle outlet(s) on/off
   'g'   - get status of outlet(s)
   'm'   - get power supply status outlet(s) on/off
   'd'   - apply to device 'n'
   'D'   - apply to device with given serial number
   'n'   - show result numerically
   'q'   - quiet mode, no explanations - but errors
   'a'   - get plannification for outlet
   'A'   - set plannification for outlet
           '-A<num>'        - select outlet
           '--Aat "date"'   - sets an event time as a date '%Y-%m-%d %H:%M'
           '--Aafter N'     - sets an event time as N minutes after the previous one
           '--Ado <on|off>' - sets the current event's action
           '--Aloop N'      - loops to 1st event's action after N minutes

Webinterface features:
sispmctl [-q] [-i <ip>] [-p <#port>] [-u <path>] -l|L
   'l'   - start port listener
   'L'   - same as 'l', but stay in foreground
   'i'   - bind socket on interface with given IP (dotted decimal, i.e. 192.168.1.1)
   'p'   - port number for listener (2638)
   'u'   - repository for web pages (default=/usr/local/share/doc/sispmctl/skin)

I have also tried the plugin which worked for me right away:

Plugin

    {
      "plugin": "sispmctl",
      "active": true
    }

Device for the first power socket

    {
      "outletUnit": 1,
      "id": "sispm-1",
      "name": "sispm-1",
      "class": "SispmctlSwitch"
    }