- 20190429, V0.9.15
- Updated to homeduino@0.0.70 which bundles rfcontroljs and otat-repl. This version
should solve issues with stray characters in input causing node.js to error
with “Illegal Token” exception - Minor changes
- Updated to homeduino@0.0.70 which bundles rfcontroljs and otat-repl. This version
-
pimatic-homeduino@0.9.15
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
thanks for the update. so far it works well.
-
Works fine! Many thanks!!!
-
Hi,
it works!
MfG.Pimatic, my hobby.
-
That’s great, guys. Thanks for the feedback. I am glad it is working now. Looks like a corrupted file system on my test and build system caused the problem. I am still puzzled why the stuff was running fine in my test setup.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
I think it works now. The RF433-Switches are available again.
I have to check the switches in the basement tomorrow. I’m too lazy today to go downstairs
Thanks a lot.
-
My system works very well too.
I use the Virtualarduino driver with Node 8.15 now.
Many thanks !
-
After the update 0.9.15 my radio sockets work but not window shutters .(romotoren 24) .
it comes commands done up but it is not switched electrically -
For me Rohrmotor24 shutters are working. Which protokoll are you using
shutter3
orshutter4
? -
@ortin said in pimatic-homeduino@0.9.15:
shutters
Hello
I’ve been using shutters 3, running on me for two years.
Have but Rpi 3 with Jessi not stretch. will probably be on it -
Me too! Give it a try to relearn one RM24 receiver. If this work then you need to relearn all and it will work as before.
-
Hello Daniel
do you use iobrokers?
I took everything in the pimatic adapter at iobroker, including the romotoren 24, but the only one I can’t switch in iobrocker. -
I immediately tried remote control read (debug).and didn’t think that the number would change .
ID changed at shutter 3 and now everything works like before.
Thanks Daniel -
Hey @mwittig,
I just tried version 0.9.15 and it works again for the gpio driver. Thanks a lot for merging @DaanNL’s fix.
But maybe you should mention that the wiring configuration changed from wiringPi pin numbers to GPIO pin numbers for the gpio driver as described in https://github.com/pimatic/virtualhomeduino#changed-configuration. I believe the plugin documentation still tells you otherwise: https://pimatic.org/plugins/pimatic-homeduino/
-
@layereight said in pimatic-homeduino@0.9.15:
But maybe you should mention that the wiring configuration changed from wiringPi pin numbers to GPIO pin numbers for the gpio driver as described in https://github.com/pimatic/virtualhomeduino#changed-configuration. I believe the plugin documentation still tells you otherwise: https://pimatic.org/plugins/pimatic-homeduino/
Thanks for point this out. I’ll review and review the docs accordingly.
Regarding @DaanNL’s fix I notice this build script requires a cross-compilation setup which did not work in my setup. I changed the script manually, to direct compilation which worked for me.
EDIT: @layereight I have revised the README section. Can u please revise?
https://github.com/pimatic/pimatic-homeduino/#b-raspberry-pi-with-optional-attiny45–85-prefilter"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Hey @mwittig,
your change in the documentation looks good to me. Thanks!
@mwittig said in pimatic-homeduino@0.9.15:
Regarding @DaanNL’s fix I notice this build script requires a cross-compilation setup which did not work in my setup. I changed the script manually, to direct compilation which worked for me.
What do you mean? There are 2 Makefiles in the repo. Just
make
will try the cross compilation on a x86_64 machine.make -f Makefile.rpi
will perform the compilation directly on a Raspberry Pi as described in https://github.com/pimatic/virtualhomeduino#compile-on-a-raspberry-pi. What did you do exactly? Just out of curiosity. -
@layereight Ah, ok. Possible I used the wrong Makefile
EDIT: Thanks for the review, btw!
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law