I have buyed a amst 606, but in homeduino Debug i only see the closed state. I haver added it with contact1 protocol but it is always closed. when i open the window, nothing appears in thehomeduino debug. Any ideas or do i something wrong?
Thanks in advance
-
[Solved] kaku AMST-606 problems
-
@p4co86
tried with switch4?
kaku and intertechno are using the same protocols usually.
can you post the debug data and your device pls?pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
I have the same contact on my backdoor. Works great, this is my config:
{ "id": "door-contact", "name": "achterdeur", "class": "HomeduinoRFContactSensor", "protocols": [ { "name": "contact1", "options": { "unit": 9, "id": 14785594 } } ] },
-
mine looks like the same, just other id.
-
Do you see it in log?
tail -f pimatic-app/pimatic-daemon.log
should give you something like:
19:24:23.432 [pimatic-homeduino] debug: dimmer1: { id: 14785594, all: false, un it: 9, dimlevel: 12, state: true }
19:24:23.442 [pimatic-homeduino] debug: pir5: { id: 14785594, all: false, prese nce: true, unit: 9 }
19:24:23.452 [pimatic-homeduino] debug: contact1: { id: 14785594, all: false, c ontact: false, unit: 9 } -
see just this
18:18:50.678 [pimatic] info: New device "System Memory"... 18:18:50.818 [pimatic] info: New device "Kodi Media Player"... 18:18:50.889 [pimatic] info: New device "Kodi Media Center"... 18:20:27.839 [pimatic-kodi] info: Kodi connected 18:20:28.798 [pimatic-mobile-frontend] info: packing static assets 18:20:31.316 [pimatic-mobile-frontend] info: packing static assets finished 18:20:31.345 [pimatic-mobile-frontend] info: rendering html 18:20:49.832 [pimatic-mobile-frontend] info: rendering html finished 18:20:49.955 [pimatic] info: Listening for HTTP-request on port 80... 18:20:50.051 [pimatic-homeduino] info: Connected to homeduino device.
doesent matter if i turn on a switch or off. it works but i didnt see it in the log.
"logLevel": "debug",
-
strange, now it works. i turned graph the state on to see when it works and when not. thanks.
is it possible to add a dot instead of a (opened/closed) ?
-
@p4co86 use a pir device with pir5, this is a kaku protocol that works for all the kaku devices.
-
pir5 the dot changes not but the status changes from absent to present etc. dot is always just a line circle
-
You must use a pir protocol instead of an contact protocol. Because the contact protocol emits a other event message in pimatic as an pir protocol.
EDIT: sorry I haven’t read that you use pir5. What tells you the debug message?
pimatic rocks!!!
-
presence true
and
presence false.but the dot never change. it stays alway at a line circle.
when i hover with the mouse it is absent and present when open/close the door. -
I have noticed, that the dot changes when i open the window, but after maybe 5 seconds it changes back. But the door is still open. Any idea?
-
disable the auto reset:
"autoReset": false
ex:
{ "id": "door-contact", "name": "achterdeur", "class": "HomeduinoRFPir", "protocols": [ { "name": "pir5", "options": { "id": 14785594, "unit": 9 } } ], "autoReset": false },