pimatic-homeduino@0.9.12

---

• 20190415, V0.9.12
  • Added xUpLabel, xDownLabel, xStoppedLabel extensions to HomeduinoRFShutter, issue #70
  • Only listen to “on” event on switch discovery to prevent invalid device
    types, thanks @Wiebe Nieuwenhuis
  • Validity check on temperature and/or humidity to prevent invalid devices on
    discovery, thanks @Wiebe Nieuwenhuis
  • Added battery indicator support for HomeduinoRFContactSensor
  • Added option “inverted” for HomeduinoRFContactSensor, thanks @Bernd Strebel
  • Added HomeduinoRFShutter rollingTime attribute to support moving shutter
    by percentage, thanks @Michael Kotten
  • Updated to homeduino@0.0.67 which includes migration to serialport@6 for
    supporting newer Node.js version

Note, this version also contains some RF protocol changes which may result in some devices are no longer detected. Please report any anomalies here or use https://github.com/pimatic/pimatic-homeduino/issues

Hey Marcus, first thanks for the update. I want to ask two things.

1. Could it be that the updated shutter3 protocol, which contains the updated code for rohrmotor24 is not part of this version? After the update my shutters don’t react.
2. Auto reset function for Up/Down. I hoped it is part of the rolling time. But unfortunately it isn’t.

Sorry for asking directly after you made the update, but could you be so kind to add at least the first one?

Hi,
i have make a short test with my intertechno- products. It works!!!
I have only a new error in the start-sequenz of pimatic:

The last entry:

error [pimatic-tplink-smartplug]: Unable to get power state of device: Error: TCP Timeout
error [pimatic-tplink-smartplug,TPlinkHS110]: Error getting attribute value tp-steckdose-a.state: undefined
error [pimatic-tplink-smartplug]: Unable to get power state of device: Error: TCP Timeout
error [pimatic-tplink-smartplug]: Unable to get power state of device: Error: TCP Timeout
error [pimatic-tplink-smartplug]: Unable to get consumption of device: Error: TCP Timeout
error [pimatic-raspbee]: websocket keep alive error, try to reconnect
error [pimatic-shell-execute]: [ShellSensor#homeduino-version] Error: Error getting attribute value for Homeduino Version: cat: /home/pi/pimatic-app/node_modules/pimatic-homeduino/package.json: Datei oder Verzeichnis nicht gefunden

The output in the web-frontend is okay:

MfG, Jens.

@jens I think the error only occurs during update when the pimatic-homeduino directory is removed as part of the update procedure.

I´m getting:
Could not initialize the plugin "homeduino": /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/serialport/build/Release/serialport.node)
Do i have to update the Homeduino manually?

@michael-rudek said in pimatic-homeduino@0.9.12:

Do i have to update the Homeduino manually?

Which Node.js version do you have installed?
Most likely, the build environment is outdated. Which gcc version is installed, type gcc --version?

gcc (Raspbian 4.9.2-10+deb8u1) 4.9.2
node v4.6.2

@michael-rudek The compiler is fairly old. Please try to install the latest version of build-essential.

sudo apt-get update
sudo apt-get install build-essential

I did, but this is the answer:
build-essential ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 270 nicht aktualisiert.

Hi,
in my Raspberry PI 3B+ work

pi@PI3matic:~ $ gcc --version
gcc (Raspbian 6.3.0-18+rpi1+deb9u1) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

MfG.

@michael-rudek OK. Seem like you are still on Jessie which does not contain the latest compiler. You can try the following:

Seems like you are still running on Jessi and you haven’t updated the system for a long time.
Please consider updating using sudo apt-get dist-upgrade. Please make a full backup of the system (e.g. backup of the sd-image) before upgrading … just in case.

I like to pick up my 2nd point

@ortin said in pimatic-homeduino@0.9.12:

2. Auto reset function for Up/Down. I hoped it is part of the rolling time. But unfortunately it isn’t.

@michbeck100: As I know you made a pull request for the moving shutter
by percentage support. Could you be so kind and add a function which release the related button (up/down) after the configured time?

@mwittig I had the same message:
Could not initialize the plugin "homeduino": /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/serialport/build/Release/serialport.node)

Updating using sudo apt-get dist-upgrade
Installed build-essential

Still see version gcc (Raspbian 4.9.2-10+deb8u1) 4.9.2

What did I do wrong?

What to do to get Homeduino working again?

Same here …

Could not initialize the plugin “homeduino”: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.21’ not found (required by /home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/serialport/build/Release/serialport.node)

@petjepet
Try: sudo apt-get -f install

i think all Users that not uses Stretch has this Problem. i has only 2 Devices left with 433 … so i deleted the Plugin… and replaced the rest with zwave / ikea.

@tehmilcho said in pimatic-homeduino@0.9.12:

i think all Users that not uses Stretch has this Problem.

See also my earlier comment. Did you install system updates on your Jessie system?

Another suggestion: cd to the pimatic-homeduino directory and remove the node_modules directory. Install dependencies.

cd /home/pi/pimatic-app/node_modules/pimatic-homeduino/
sudo rm -rf node_modules
sudo npm install --unsafe-perm

@mwittig said in pimatic-homeduino@0.9.12:

@tehmilcho said in pimatic-homeduino@0.9.12:

i think all Users that not uses Stretch has this Problem.

See also my earlier comment. Did you install system updates on your Jessie system?

Another suggestion: cd to the pimatic-homeduino directory and remove the node_modules directory. Install dependencies.

cd /home/pi/pimatic-app/node_modules/pimatic-homeduino/
sudo rm -rf node_modules
sudo npm install --unsafe-perm

Did this and after restart Pimatic the interface is not working in the browser and I see the menu in plain text with somewhere over the first menu item in the text ‘Permission denied’.

In the log file I see:
Unhandled rejection Error: Cannot open /dev/ttyUSB1

It is all a bit fuzzy for me as an unexperienced user: when installing something (like the suggestion above) cryptic messages rolling over the screen (no errors as far as I can identify, some warnings).

I guess the above action to install dependencies should not mess up the Pimatic browser presentation and interface.

Did you delete the directory?
Then you have to restart Pimatic twice. First it will be installed, the second one will enable it.
Then refresh the your Browser.
I had the same…

The command sudo rm -rf node_module does that I believe and did not give an error.

I see this.
Pimatic restarted several times and browser also refreshed.

Still having the ttyUSB1 error.

In the log file the homeduino 0.9.12 seems to be working now, plugin is loaded and messages are arriving.