History chart shows only a 3h history

---

Hi,
has somebody an idea what could be the problem, when the pimatic onboard history chart shows only the last 3h (sometimes less)? System runs since days. The config is untouched since the beginning:

    "database": {
      "deviceAttributeLogging": [
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "*",
          "interval": "0",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "continuous",
          "interval": "5min",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "temperature",
          "type": "number",
          "expire": "1y"
        },
        {
          "deviceId": "*",
          "attributeName": "humidity",
          "type": "number",
          "expire": "1y"
        }
      ],
      "messageLogging": [
        {
          "level": "*",
          "tags": [],
          "expire": "7d"
        },
        {
          "level": "debug",
          "tags": [],
          "expire": "0"
        }
      ]
    },

Can I somehow repair a db? When I delete my old one, than pimatic doesn’t come up anymore. The process is there, but the gui shows “no connection”. Seems I am the only one with this problem, but what can I do?

If you delete your Database, Pimatic shouldt build a new one.
Did you stop Pimatic before deleting?
Gruß M.

Yes, I stopped pimatic. I can even see that a new db file is created after restart, but then the story ends. Pimatic will never come up. Only by restoring the old db pimatic works again…

Maybe SD-Card/Harddrive/USB-Stick full/defect/corrupt?
Did you move/delete the Database from your drive or did you just rename it?

Pimatic runs on a HDD only Raspbian is still located on the system SD card. The system itself works well. Other stuff beside pimatic from the HDD as well. I assume that the SD and HDD are fine.
In the past as I had problems with my SD card then the whole system had problems to work, therefore I moved everything to the HDD.

I moved the old DB in an other folder before I restart pimatic. But I tried as well a renaming only.

After I was able to start pimatic with a new db the charts works again.
Solution for the start problem with a new db can be found here…