Dear Willy and Chris
Thanks for your reaction.
I have update everything but i see now also not an id number.
I will give you soon all the data from the channels 1 to 5.
Already thanks, gerrit.
Radio remote control commands read ? - Rohrmotor24
Dear Willy and Chris
Thanks for your reaction.
I have update everything but i see now also not an id number.
I will give you soon all the data from the channels 1 to 5.
Already thanks, gerrit.
Hallo.
und gleich wieder auf Deutsch. Geht schneller. Hoffe das ist kein Problem.
bin zurück aus dem Urlaub und die neuen Bauteile sind auch da. Werd das mal entsprechend umbauen und melde mich dann obs klappt.
Aber wie ich sehen hat sich ja hier schon was getan. Das Protokoll ist schon im pimatic verbaut. Ich bin begeistert.
Gruß Ronny
So Modul getauscht und das Auslesen Funktioniert.
Jetzt habe ich mal geschaut und das Device entsprechend eines anderen Beitrages eingerichtet. Nur weiss ich jetzt nicht wie ich meine ID aus den Ganzen Zahlen zusammenbaue. Wäre für Hilfe Dankbar.
@rowoy
Da rohrmotor24 noch nicht in den offiziellen Quellen drin ist, versuch mal das:
shutter4.js downloaden
Stop pimatic
kopiere “shutter4.js” nach “/home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/rfcontroljs/lib/protocols”
füge , ‘shutter4’ am Ende der Zeile 6 von “/home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/rfcontroljs/lib/controller.js” ein:
Zuvor (die Namen können anders aussehen!):
....... 'shutter2', 'shutter3''];
Nach dem Einfügen:
....... 'shutter2', 'shutter3', 'shutter4'];
Start pimatic
Wenn du eine Taste auf deiner original Fernbedienung drückst, solltest du in etwa sowas sehen:
[pimatic-homeduino] debug: shutter4: { id: 35918788, channel: 1, command: up, all: false }
Und dann fügst du in deinem Device die angezeigte id und Kanal ein.
Hallo Willy
Danke für den Tipp. Hab das jetzt endlich mal ausprobiert und was soll ich sagen. SUPER… es geht. Vielen Dank.
Gruß Ronny
Hallo Willy
versuche gerade eine Rule zu erstellen. Wie genau spreche ich den Shutter jetzt an?
Gruß Ronny
Hi,
hast du Buttons für die Befehle verwendet? Dann in etwa so:
IF it is 21:00 THEN press rolladen1-ab
Dann wird um 21 Uhr der Button für rolladen1-ab gedrückt.
Hallo .
Danke für den Hinweis. Hab das jetzt mal versucht. Device schauen so aus. Im Moment hab ich zwei Rollos.
{
"id": "rolladenF",
"name": "Rolladen Fenster",
"class": "HomeduinoRFButtonsDevice",
"buttons": [
{
"id": "roll1",
"text": "Rauf",
"protocols": [
{
"name": "shutter4",
"options": {
"id": 6559260,
"channel": 2,
"command": "up"
}
}
]
},
{
"id": "roll2",
"text": "Stop",
"protocols": [
{
"name": "shutter4",
"options": {
"id": 6559260,
"channel": 2,
"command": "stop"
}
}
]
},
{
"id": "roll3",
"text": "Runter",
"protocols": [
{
"name": "shutter4",
"options": {
"id": 6559260,
"channel": 2,
"command": "down"
}
}
]
}
]
},
Gruß Ronny
@rowoy
OK, dann versuch mal das:
IF it is 21:00 THEN press roll3
Wenn um 21 Uhr der Rollanden runterfährt ist alles OK
Hallo
Perfekt… Funktioniert bestens.
Danke noch mal für deine Hilfe.
Gruß Ronny