Hi, I plan to make my smart intercom even smarter (so far only a 433 mhz relay is on it to open the front door) and would like to replace my previous configuration with a Wemos D1 Mini Setup. For this I ordered a D1 Mini, a Relay Shield, Tripler Board and various other needed small parts.
The plan is basically the front door on Wifi (and thus connected via Pimatic to use the web interface) to open and a notification (no preference which pimatic plugin) on my phone when someone rings.
The wiring outside, who could help me create a secure interface between the D1 Mini and Pimatic and how could I solve that I can open the door and get notifications to pimatic when someone rings?
Of course, I could now buy a “Nello One”, but I like to tinker and the parts are very cheap!
Here is my parts list:
WeMos D1 Mini Relay
https://www.ebay.de/itm/WEMOS-D1-Mini-Relay-Relais-Shield-Erweiterung-NodeMCU/252745996865?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Tripler Base
https://www.ebay.de/itm/D1-Mini-Triple-Base-Shield-Erweiterung-Wemos-Zubehör-Proto-Board/253708927497?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749. l2649
DC-DC voltage regulator
https://www.ebay.de/itm/DC-DC-Spannungsregler-Modul-LM2596S-Step-Down-einstellbar-Schaltregler-Konverter/222504001779?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Hallo Zusammen, ich plane meine smarte Gegensprechanlage noch smarter zu machen (bisher hängt nur ein 433 mhz Relais dran um die haustür zu öffnen) und möchte meine bisherige Konfiguration durch ein Wemos D1 Mini Setup ersetzen. Dazu habe ich mir einen D1 Mini, ein Relay Shield, Tripler Board und diverse andere benötigte Kleinteile bestellt.
Geplant ist im Grunde die Haustür über Wifi (und damit angebunden über Pimatic um die Weboberfläche zu nutzen) öffnen zu können und eine Benachrichtigung (egal welches pimatic-plugin) auf mein Handy wenn jemand klingelt.
Die Verkabelung mal außen vor, wer könnte mir helfen eine sichere Schnittstelle zwischen dem D1 Mini und Pimatic herzustellen und wie könnte ich lösen, das ich die Tür öffnen kann und Benachrichtigungen an pimatic bekomme wenn jemand klingelt?
Natürlich könnte ich mir jetzt ein “Nello One” kaufen, aber ich bastel nun mal gern und die Teile sind sehr günstig!
Hier ist meine Teileliste:
WeMos D1 Mini Relay
https://www.ebay.de/itm/WEMOS-D1-Mini-Relay-Relais-Shield-Erweiterung-NodeMCU/252745996865?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
DC-DC Spannungsregler
https://www.ebay.de/itm/DC-DC-Spannungsregler-Modul-LM2596S-Step-Down-einstellbar-Schaltregler-Konverter/222504001779?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649