You’re welcome.
-
-
@kosta
Sorry, I have the next problem.
Somehow, I only dress the problems as I see fit.
Now my ConBee works. Now I have problems with the Pir’s. These problems didn’t exist with the RaspBee. However, I had another deConz version on the RaspBee.
I had already installed the older deConz version. Unfortunately also without success.
I deleted the individual devices several times. Deleted in deConz, reinstalled. Deleted in pimatic, reinstalled. I can’t get a permanent connection between ConBee and pimatic. I see a movement in the GUI of phoscon. Pimatic does not get this movement.
Before changing from RaspBee to ConBee (btw from Raspbian to Debian) I didn’t have these problems.
Maybe it’s a problem with the deConz version, although I’ve already tried a few different ones.
I can switch all lamps with pimatic via deConz. Only the Pir’s cause these problems."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
It seems to be a vicious circle.
I get the signal from the ConBee Pir’s in iobroker. That means for me the pimatic plugin can’t handle the latest version of deconz properly.
I have installed pimatic-RaspBee 0.0.7. But the latest version is 0.0.10
I don’t get it installed with pimatic 0.9.42. There I get the error: … 0.9.43…not found… A known problem.
And the newest version of pimatic-RaspBee is unfortunately not downward compatible as it seems.
Anyway, the topic goes back to pimatic and how to proceed. If I was running 0.9.43 I would probably have some problems less."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
@Thrusty ok. that is strange. The plugin version 0.0.10 is compatible with pimatic 0.9.42. there should be no error with .43 version.
Maybe you can post the error message?To check the main problem you can activate the debug mode. Then all received events are logged.
The pir events should be visible there.But we must bring your environment to 0.0.10.
I have improved the websocket connection in this version with reconnect on connection error.If you delete the pimatic-raspbee folder in node_modules, causing a reinstallation of the latest plugin version, does the installation fail?
I’m running pimatic 0.9.42,plugin version 0.0.10, deconz on 2.5.52 and device firmware 26300500.
-
I run the same versions as Kosta and no problems at all-
-
Hello, now I’ve done it all over again. Devices deleted, Debian reinstalled under proxmox, deConz reinstalled, pimatic-Raspbee folder deleted and restarted.
I don’t know what it was exactly, but now it works again. The pir’s are active again in pimatic. Now for almost two days. I hope it stays that way.
Merry Christmas to you all."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
Or is it already implemented, but I’m not able to figure it out?
-
@OrTiN
you should first check the debug log.
there you should see the button events.
if not the deconz api will probably not forward the events.
maybe upgrade if possible the deconz softwareyou should see something like that:
22:34:44.351 [pimatic-raspbee] { e: 'changed', 22:34:44.351 [pimatic-raspbee]> id: '13', 22:34:44.351 [pimatic-raspbee]> r: 'sensors', 22:34:44.351 [pimatic-raspbee]> state: { buttonevent: 1002, lastupdated: '2019-03-12T22:34:44' }, 22:34:44.351 [pimatic-raspbee]> t: 'event', 22:34:44.351 [pimatic-raspbee]> uniqueid: '123' }
The RaspBeeSwitchSensor device responds to all received events.
you can react to the event by a rule
when $raspbee_device.state = 1001 -
After I adapt the “resetTime” from 1000 to 5000 it was possible to use the states 1001 (lhold) and 1003 (hold release).
-
@Kosta: i started moving my Tradfri and Aqara lights, switches and sensors to the Raspbee plugin.
When i add a HUE CT Lamp or Tradfri CT lamp via the Phoscon App and use the pimatic auto-discover a RaspbeeCT device is added.
After added this device to a page, I get the following error, accessing Pimatic via my iPhone or iPad:
error [pimatic-mobile-frontend]: Client error: TypeError: Unable to process binding "template: function (){return { name:$root.getItemTemplate,foreach:$data.getUngroupedDevices(),afterRender:$data.afterRenderDevice} }
Message: null is not an object (evaluating 'n[a]')
When I remove the device, the errors are gone.
Any idea?Bert.
-
I got raspbee working pretty easy to communicate with the deconz Rest API.
I’m using TRÅDFRI bulbs. But I’m wondering now: is there any way to react to the Moment, when the bulb is switched on with the wall switch - so when it gets Power. -
@quotschmacher
What are you talking about? What should react how?
As far as I know, the lamp turns on the same way it was turned off. If the power was gone before.
Of course you can react yourself, switch it on or off. 😉"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
i have the normal wall switch to turn the light on or off. this is a dumb switch. now i have the tradfri bulb in my lamp and press the switch. the bulb gets power and lights up. in the phoscon app this is visualized by a dark or light bulb. but in pimatic i don’t get any event. neither “presence” nor “state” act accordingly. i would like to trigger a rule, when the light is switched on.
-
@quotschmacher
With me pimatic acts on it. When I switch on the wall switch, I get the signal “online” a little later and afterwards the switch in pimatic also corrects its condition.
Maybe @kosta can help you, sorry.
But your description of the problem is much better."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
@Thrusty the online attribute is for me only available for the tradfri remotes, not for the lights…
-
@quotschmacher
For none of the lamps is the online symbol visible? I have 12 of these bulbs. And I can see if everyone in pimatic is online or not. And also the condition on/off, at least when she’s online. Very funny what you tell.Maybe reinstall everything again? Delete the lamps from pimatic and reinstall them? Those would be my ideas, that’s how I would start. But maybe you have already done that.
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
@Thrusty device class is for example RaspBeeCT and the available parameters are
- dimlevel
- ct
- state
- presence
prexence is always true and state is only updated correctly when changed via pimatic - not with the wall switch
-
@quotschmacher
I’m afraid I’m out of it. Unfortunately I can only read, think and install. I think like you too."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)