@kosta said in New Plugin - [pimatic-raspbee]:
if you have already a service running on 80 you must change the port with these steps:
open this file in editor
sudo vi /etc/systemd/system/deconz-gui.service.d/local.conf
I have to change the port, because my NGNIX server is using port 80. So I want to change the .conf. But I can’t find it in /etc/systemd/system/deconz-gui.service.d/
. Even when I generate the file in the location the port adaption will not take place.
But the same content Kosta described is part of the deconz.service
file in /lib/systemd/system/
, too. When I change the port there and restart the RasPi the service works on the new port.
I made the installation according Kostas post. Why I can’t find /etc/systemd/system/deconz-gui.service.d/local.conf
?
On windows were I first tested the stick I got an address and a channel for the stick. And I was able to connect some sensors.
On the raspberry address and channel ist 0. No sensor can be connected here
No idea what could be wrong here…
*** Update ***
Okay, after a reset of the deconz GW now I have channel 11 and a valid address, but still no connection to aqara sensors possible…