Hi is there a possibility to disable the log output when an incoming rf signal is recognized? I get the following string if there is new data: <- MySensorDHT { sender: 10, sensor: 0, type: 1, value: ‘45.5’ }
Thank you for your hints!
[Solved] disable log print of mysensors plugins
Hi is there a possibility to disable the log output when an incoming rf signal is recognized? I get the following string if there is new data: <- MySensorDHT { sender: 10, sensor: 0, type: 1, value: ‘45.5’ }
Thank you for your hints!
Not in the config. But I changed the MySensors.coffee file in pimatic-app/node_modules/pimatic-mysensors/MySensors.coffee
search for all env.logger.info
and replace it by env.logger.debug
Awesome. Thanks. I was just looking at this yesterday and was trying to figure out how to disable toast. It makes more sense to just change the severity of the log so it doesn’t show.
Still unknown for me, how to disable the toast.
A bit to late, I found the same issue renewed here (#473). Seems to be not solved yet.
For a fast solution you can copy my fork
https://github.com/Icesory/pimatic-mysensors/commit/2ccf4cfc1e14bd26040652001da43a405ca8c196
pimatic rocks!!!