Yes, the schedule is “flashed” to the thermostat it self.
Childlock is deactivated in my case.
Yesterday the “window open” case worked well for me with the delay. I will monitor it some additional days.
But another case occured. I pressed the “boost” button at the thermostat and the countdown started 600, 599, 598, …
When I looked again after two or three minutes, the thermostat was back on auto mode with setpoint to the comfy temp. There are no other rules defined in pimatic than window open/close. And the “update” rule that changes the setpoint every 10 minutes by plus/minus 1°
@mwittig What about the device variables (comfy, vac, eco)? Could you make them accessible via action?