SRX882 modul with ESPimaitcRF

---

Hi,
I have problems to receive data with a SRX882 modul on a wemos D1 flashed with ESPimaticRF.
I put the CS pin on high level by a bridge to VCC. The data pin is connected to GPIO 5 (default pin). A RXB6 modul works fine. As well the sender TRX882 works perfect.

Is there any trick to make it working?

@ortin said in SRX882 modul with ESPimaitcRF:

SRX882

I am not familiar with SRX882 , can you explain what’s different om this receiver vs a normal chinese RF receiver ? Are you sure the combination of ESPimaticRF and the SRX882 is the issue?

No I’m not sure that it is the combi of ESPimaitcRF and SRX882. It is only an idea. I will try the combination Arduino and SRX882 on the weekend. I bought it because it is an recommenced receiver here on the board. It seems to be more sensitive as other receiver.

In the meantime: post your ESPimaticRF homeduinog config (from the ESP website).

Here you are

are you sure it’s not a range issue ?

Nope, I test it with a remote close to the receiver.

any news on that?

Nope, not yet. But I know that the moduls work with RFLink. Next week I will give it one more try.