Homeduiono RF-Codes for REV-Ritter Switch 008342

tpointandrew

So, my remote of my Rev-Ritter Switches seems to be dead.

Is it possible for someone to read out the codes for me?

Or is it not compatible with pimatic? These switches with the rotation wheel:
A1,A2,A3 B1…B3, C1…C3, D1…D3

Tried a lot of combinations but it can´t find the right Unit and Systemcode for switching it.

I have 3 switches with:
008342 and 0305 on it

and 1 switch with:
008342 and 0205 on it

On pilight it was possible for me to switch them with the cleverwatts protocol on but only with a second switch off.

If someone use these switches or could find out the codes for me via debug would be great

Icesory

@leader21 has created a calculation table for this. But I can’t find this.

leader21

here you are : pimatic/pimatic#380
these are for intertechno and similar devices.
i’m using this wth switch 4 protocol. click on the link below, you will get all information there.

tpointandrew

@leader21 said:

here you are : pimatic/pimatic#380
these are for intertechno and similar devices.
i’m using this wth switch 4 protocol. click on the link below, you will get all information there.

Thx. I’ve tried every combination of your calculated table but no of this codes work for me
I will not give up my Rev switches

Icesory

Are you sure that you use the right protocol?

tpointandrew

@Icesory said:

Are you sure that you use the right protocol?

I think so… tried every protocol from switch1 to switch 15. inclusive the difference with id, systemcode programcode etc… from a1-a3, b1-b3, c1-c3 and d1-d3.

the brennstuhl switches working fine with switch5 but for the I used my remote with debug.

andrewtpoint

Hi

so now I’ve got the correct codes for my rev ritter switches but I am not able to configure the switch correct because it will not switch ON and OFF with only 1 Switch.

It would be nice if someone has an idea why my switch goes ON but not OFF

{
“id”: “rfswitch3”,
“name”: “RevSwitchB2”,
“class”: “HomeduinoRFSwitch”,
“protocols”: [
{
“name”: “switch5”,
“options”: {
“id”: 567487,
“unit”: 2
},
“send”: true,
“receive”: true
},
{
“name”: “switch5”,
“options”: {
“id”: 567487,
“unit”: 0
},
“send”: false,
“receive”: true
}
]
}

Here my receive debugs:

B2 On:

debug [pimatic-homeduino]: led4: { id: 30068, command: ‘code:00001100’ }
10:06:44debug [pimatic-homeduino]: led3: { id: 30068, command: ‘bright+’ }
10:06:44debug [pimatic-homeduino]: led2: { id: 30068, command: ‘code:00001100’ }
10:06:44debug [pimatic-homeduino]: led1: { id: 30068, command: ‘code:00001100’ }
10:06:44debug [pimatic-homeduino]: contact2: { id: 567487, contact: false }
10:06:44debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
10:06:44debug [pimatic-homeduino]: switch15: { id: 481088, unit: 0, state: false, all: true }
10:06:44debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
10:06:44debug [pimatic-homeduino]: switch5: { id: 567487, unit: 2, all: false, state: false }
10:06:44debug [pimatic-homeduino]: received: [ 412, 508, 1276, 13204 ] 02202020022002200220212002200202020202022020020203
10:06:44debug [pimatic-homeduino]: data: “RF receive 412 1276 508 13204 0 0 0 0 01101010011001100110121001100101010101011010010103”

B2 off:

debug [pimatic-homeduino]: led4: { id: 30068, command: ‘code:00000011’ }
10:07:45debug [pimatic-homeduino]: led3: { id: 30068, command: ‘code:00000011’ }
10:07:45debug [pimatic-homeduino]: led2: { id: 30068, command: ‘code:00000011’ }
10:07:45debug [pimatic-homeduino]: led1: { id: 30068, command: ‘code:00000011’ }
10:07:45debug [pimatic-homeduino]: contact2: { id: 567487, contact: false }
10:07:45debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
10:07:45debug [pimatic-homeduino]: switch15: { id: 481088, unit: 2, state: false, all: false }
10:07:45debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
10:07:45debug [pimatic-homeduino]: switch5: { id: 567487, unit: 0, all: true, state: false }
10:07:45debug [pimatic-homeduino]: received: [ 416, 1280, 13236 ] 01101010011001100110101001100101010101010101101002
10:07:45debug [pimatic-homeduino]: data: “RF receive 416 1280 13236 0 0 0 0 0 01101010011001100110101001100101010101010101101002”

Icesory

Can you pls post all debug output for all buttons.
It looks like a different, not implemented protocol.

andrewtpoint

hi, okay. here the received data for all combinations from the switch:

Hope you can use it for implementation in a new switch

A1 aus

17:19:44debug [pimatic-homeduino]: led4: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: led3: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: led2: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: led1: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: contact2: { id: 172735, contact: false }
17:19:44debug [pimatic-homeduino]: pir2: { unit: 5, id: 8, presence: true }
17:19:44debug [pimatic-homeduino]: switch15: { id: 875840, unit: 2, state: false, all: false }
17:19:44debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:19:44debug [pimatic-homeduino]: switch5: { id: 172735, unit: 0, all: true, state: false }
17:19:44debug [pimatic-homeduino]: received: [ 416, 1284, 13276 ] 10100110011001101010011001100101010101010101101002
17:19:44debug [pimatic-homeduino]: data: “RF receive 1284 416 13276 0 0 0 0 0 01011001100110010101100110011010101010101010010112”

A1 an

17:19:39debug [pimatic-homeduino]: led4: { id: 54740, command: ‘code:00001100’ }
17:19:39debug [pimatic-homeduino]: led3: { id: 54740, command: ‘bright+’ }
17:19:39debug [pimatic-homeduino]: led2: { id: 54740, command: ‘code:00001100’ }
17:19:39debug [pimatic-homeduino]: led1: { id: 54740, command: ‘code:00001100’ }
17:19:39debug [pimatic-homeduino]: contact2: { id: 172735, contact: false }
17:19:39debug [pimatic-homeduino]: pir2: { unit: 5, id: 8, presence: true }
17:19:39debug [pimatic-homeduino]: switch15: { id: 875840, unit: 0, state: false, all: true }
17:19:39debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:19:39debug [pimatic-homeduino]: switch5: { id: 172735, unit: 2, all: false, state: false }
17:19:39debug [pimatic-homeduino]: received: [ 412, 1280, 13244 ] 10100110011001101010011001100101010101011010010102
17:19:39debug [pimatic-homeduino]: data: “RF receive 1280 412 13244 0 0 0 0 0 01011001100110010101100110011010101010100101101012”

A2 aus

debug [pimatic-homeduino]: led4: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: led3: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: led2: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: led1: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: contact2: { id: 174271, contact: false }
17:33:28debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:33:28debug [pimatic-homeduino]: switch15: { id: 874304, unit: 2, state: false, all: false }
17:33:28debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:33:28debug [pimatic-homeduino]: switch5: { id: 174271, unit: 0, all: true, state: false }
17:33:28debug [pimatic-homeduino]: received: [ 420, 1284, 13304 ] 10100110011001100110101001100101010101010101101002
17:33:28debug [pimatic-homeduino]: data: “RF receive 1284 420 13304 0 0 0 0 0 01011001100110011001010110011010101010101010010112”

A2 an

debug [pimatic-homeduino]: led4: { id: 54644, command: ‘code:00001100’ }
17:33:44debug [pimatic-homeduino]: led3: { id: 54644, command: ‘bright+’ }
17:33:44debug [pimatic-homeduino]: led2: { id: 54644, command: ‘code:00001100’ }
17:33:44debug [pimatic-homeduino]: led1: { id: 54644, command: ‘code:00001100’ }
17:33:44debug [pimatic-homeduino]: contact2: { id: 174271, contact: false }
17:33:44debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:33:44debug [pimatic-homeduino]: switch15: { id: 874304, unit: 0, state: false, all: true }
17:33:44debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:33:44debug [pimatic-homeduino]: switch5: { id: 174271, unit: 2, all: false, state: false }
17:33:44debug [pimatic-homeduino]: received: [ 416, 1284, 13244 ] 10100110011001100110101001100101010101011010010102
17:33:44debug [pimatic-homeduino]: data: “RF receive 1284 416 13244 0 0 0 0 0 01011001100110011001010110011010101010100101101012”

A3 aus

debug [pimatic-homeduino]: led4: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: led3: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: led2: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: led1: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: contact2: { id: 174735, contact: false }
17:34:02debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:34:02debug [pimatic-homeduino]: switch15: { id: 873840, unit: 2, state: false, all: false }
17:34:02debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:02debug [pimatic-homeduino]: switch5: { id: 174735, unit: 0, all: true, state: false }
17:34:02debug [pimatic-homeduino]: received: [ 420, 1280, 13312 ] 10100110011001100110011001101010010101010101101002
17:34:02debug [pimatic-homeduino]: data: “RF receive 1280 420 13312 0 0 0 0 0 01011001100110011001100110010101101010101010010112”

A3 an

debug [pimatic-homeduino]: led4: { id: 54615, command: ‘code:00001100’ }
17:34:17debug [pimatic-homeduino]: led3: { id: 54615, command: ‘bright+’ }
17:34:17debug [pimatic-homeduino]: led2: { id: 54615, command: ‘code:00001100’ }
17:34:17debug [pimatic-homeduino]: led1: { id: 54615, command: ‘code:00001100’ }
17:34:17debug [pimatic-homeduino]: contact2: { id: 174735, contact: false }
17:34:17debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:34:17debug [pimatic-homeduino]: switch15: { id: 873840, unit: 0, state: false, all: true }
17:34:17debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:17debug [pimatic-homeduino]: switch5: { id: 174735, unit: 2, all: false, state: false }
17:34:17debug [pimatic-homeduino]: received: [ 420, 1280, 13280 ] 10100110011001100110011001101010010101011010010102
17:34:17debug [pimatic-homeduino]: data: “RF receive 1280 420 13280 0 0 0 0 0 01011001100110011001100110010101101010100101101012”

B1 aus

debug [pimatic-homeduino]: led4: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: led3: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: led2: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: led1: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: contact2: { id: 565951, contact: false }
17:34:33debug [pimatic-homeduino]: pir2: { unit: 17, id: 8, presence: true }
17:34:33debug [pimatic-homeduino]: switch15: { id: 482624, unit: 2, state: false, all: false }
17:34:33debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:33debug [pimatic-homeduino]: switch5: { id: 565951, unit: 0, all: true, state: false }
17:34:33debug [pimatic-homeduino]: received: [ 416, 1284, 13296 ] 01101010011001101010011001100101010101010101101002
17:34:33debug [pimatic-homeduino]: data: “RF receive 416 1284 13296 0 0 0 0 0 01101010011001101010011001100101010101010101101002”

B1 an

debug [pimatic-homeduino]: led4: { id: 30164, command: ‘code:00001100’ }
17:34:48debug [pimatic-homeduino]: led3: { id: 30164, command: ‘bright+’ }
17:34:48debug [pimatic-homeduino]: led2: { id: 30164, command: ‘code:00001100’ }
17:34:48debug [pimatic-homeduino]: led1: { id: 30164, command: ‘code:00001100’ }
17:34:48debug [pimatic-homeduino]: contact2: { id: 565951, contact: false }
17:34:48debug [pimatic-homeduino]: pir2: { unit: 17, id: 8, presence: true }
17:34:48debug [pimatic-homeduino]: switch15: { id: 482624, unit: 0, state: false, all: true }
17:34:48debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:48debug [pimatic-homeduino]: switch5: { id: 565951, unit: 2, all: false, state: false }
17:34:48debug [pimatic-homeduino]: received: [ 412, 496, 1284, 13272 ] 02202020022002202020022002200202020202022021020203
17:34:48debug [pimatic-homeduino]: data: “RF receive 412 1284 496 13272 0 0 0 0 01101010011001101010011001100101010101011012010103”

B2 aus

debug [pimatic-homeduino]: led4: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: led3: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: led2: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: led1: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: contact2: { id: 567487, contact: false }
17:35:01debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:35:01debug [pimatic-homeduino]: switch15: { id: 481088, unit: 2, state: false, all: false }
17:35:01debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:35:01debug [pimatic-homeduino]: switch5: { id: 567487, unit: 0, all: true, state: false }
17:35:01debug [pimatic-homeduino]: received: [ 416, 1284, 13304 ] 01101010011001100110101001100101010101010101101002
17:35:01debug [pimatic-homeduino]: data: “RF receive 416 1284 13304 0 0 0 0 0 01101010011001100110101001100101010101010101101002”

B2 an

debug [pimatic-homeduino]: led4: { id: 30068, command: ‘code:00001100’ }
17:35:27debug [pimatic-homeduino]: led3: { id: 30068, command: ‘bright+’ }
17:35:27debug [pimatic-homeduino]: led2: { id: 30068, command: ‘code:00001100’ }
17:35:27debug [pimatic-homeduino]: led1: { id: 30068, command: ‘code:00001100’ }
17:35:27debug [pimatic-homeduino]: contact2: { id: 567487, contact: false }
17:35:27debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:35:27debug [pimatic-homeduino]: switch15: { id: 481088, unit: 0, state: false, all: true }
17:35:27debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:35:27debug [pimatic-homeduino]: switch5: { id: 567487, unit: 2, all: false, state: false }
17:35:27debug [pimatic-homeduino]: received: [ 416, 1284, 13296 ] 01101010011001100110101001100101010101011010010102
17:35:27debug [pimatic-homeduino]: data: “RF receive 416 1284 13296 0 0 0 0 0 01101010011001100110101001100101010101011010010102”

B3 aus

debug [pimatic-homeduino]: led4: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: led3: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: led2: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: led1: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: contact2: { id: 567951, contact: false }
17:35:47debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:35:47debug [pimatic-homeduino]: switch15: { id: 480624, unit: 2, state: false, all: false }
17:35:47debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:35:47debug [pimatic-homeduino]: switch5: { id: 567951, unit: 0, all: true, state: false }
17:35:47debug [pimatic-homeduino]: received: [ 420, 1284, 13352 ] 01101010011001100110011001101010010101010101101002
17:35:47debug [pimatic-homeduino]: data: “RF receive 420 1284 13352 0 0 0 0 0 01101010011001100110011001101010010101010101101002”

B3 an

debug [pimatic-homeduino]: led4: { id: 30039, command: ‘code:00001100’ }
17:36:04debug [pimatic-homeduino]: led3: { id: 30039, command: ‘bright+’ }
17:36:04debug [pimatic-homeduino]: led2: { id: 30039, command: ‘code:00001100’ }
17:36:04debug [pimatic-homeduino]: led1: { id: 30039, command: ‘code:00001100’ }
17:36:04debug [pimatic-homeduino]: contact2: { id: 567951, contact: false }
17:36:04debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:36:04debug [pimatic-homeduino]: switch15: { id: 480624, unit: 0, state: false, all: true }
17:36:04debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:36:04debug [pimatic-homeduino]: switch5: { id: 567951, unit: 2, all: false, state: false }
17:36:04debug [pimatic-homeduino]: received: [ 420, 1284, 13332 ] 01101010011001100110011001101010010101011010010102
17:36:04debug [pimatic-homeduino]: data: “RF receive 420 1284 13332 0 0 0 0 0 01101010011001100110011001101010010101011010010102”

C1 aus

debug [pimatic-homeduino]: led4: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: led3: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: led2: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: led1: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: contact2: { id: 664255, contact: false }
18:00:37debug [pimatic-homeduino]: pir2: { unit: 20, id: 8, presence: true }
18:00:37debug [pimatic-homeduino]: switch15: { id: 384320, unit: 2, state: false, all: false }
18:00:37debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:00:37debug [pimatic-homeduino]: switch5: { id: 664255, unit: 0, all: true, state: false }
18:00:37debug [pimatic-homeduino]: received: [ 420, 1284, 13296 ] 01100110101001101010011001100101010101010101101002
18:00:37debug [pimatic-homeduino]: data: “RF receive 420 1284 13296 0 0 0 0 0 01100110101001101010011001100101010101010101101002”

C1 an

debug [pimatic-homeduino]: led4: { id: 24020, command: ‘code:00001100’ }
18:01:04debug [pimatic-homeduino]: led3: { id: 24020, command: ‘bright+’ }
18:01:04debug [pimatic-homeduino]: led2: { id: 24020, command: ‘code:00001100’ }
18:01:04debug [pimatic-homeduino]: led1: { id: 24020, command: ‘code:00001100’ }
18:01:04debug [pimatic-homeduino]: contact2: { id: 664255, contact: false }
18:01:04debug [pimatic-homeduino]: pir2: { unit: 20, id: 8, presence: true }
18:01:04debug [pimatic-homeduino]: switch15: { id: 384320, unit: 0, state: false, all: true }
18:01:04debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:01:04debug [pimatic-homeduino]: switch5: { id: 664255, unit: 2, all: false, state: false }
18:01:04debug [pimatic-homeduino]: received: [ 412, 520, 1284, 13280 ] 02200220202002202020022002200202020202022021020203
18:01:04debug [pimatic-homeduino]: data: “RF receive 412 1284 520 13280 0 0 0 0 01100110101001101010011001100101010101011012010103”

C2 aus

debug [pimatic-homeduino]: led4: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: led3: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: led2: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: led1: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: contact2: { id: 665791, contact: false }
18:01:50debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:01:50debug [pimatic-homeduino]: switch15: { id: 382784, unit: 2, state: false, all: false }
18:01:50debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:01:50debug [pimatic-homeduino]: switch5: { id: 665791, unit: 0, all: true, state: false }
18:01:50debug [pimatic-homeduino]: received: [ 404, 504, 1292, 13312 ] 02210220202002200220202102200202020202020202202003
18:01:50debug [pimatic-homeduino]: data: “RF receive 404 1292 504 13312 0 0 0 0 01120110101001100110101201100101010101010101101003”

C2 an

debug [pimatic-homeduino]: led4: { id: 23924, command: ‘code:00001100’ }
18:02:08debug [pimatic-homeduino]: led3: { id: 23924, command: ‘bright+’ }
18:02:08debug [pimatic-homeduino]: led2: { id: 23924, command: ‘code:00001100’ }
18:02:08debug [pimatic-homeduino]: led1: { id: 23924, command: ‘code:00001100’ }
18:02:08debug [pimatic-homeduino]: contact2: { id: 665791, contact: false }
18:02:08debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:02:08debug [pimatic-homeduino]: switch15: { id: 382784, unit: 0, state: false, all: true }
18:02:07debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:02:07debug [pimatic-homeduino]: switch5: { id: 665791, unit: 2, all: false, state: false }
18:02:07debug [pimatic-homeduino]: received: [ 348, 496, 1288, 13312 ] 02210221212102210221212102210202020202022121020203
18:02:07debug [pimatic-homeduino]: data: “RF receive 348 1288 496 13312 0 0 0 0 01120112121201120112121201120101010101011212010103”

C3 aus

debug [pimatic-homeduino]: led4: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: led3: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: led2: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: led1: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: contact2: { id: 666255, contact: false }
18:02:29debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:02:29debug [pimatic-homeduino]: switch15: { id: 382320, unit: 2, state: false, all: false }
18:02:29debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:02:29debug [pimatic-homeduino]: switch5: { id: 666255, unit: 0, all: true, state: false }
18:02:29debug [pimatic-homeduino]: received: [ 420, 1284, 13348 ] 01100110101001100110011001101010010101010101101002
18:02:29debug [pimatic-homeduino]: data: “RF receive 420 1284 13348 0 0 0 0 0 01100110101001100110011001101010010101010101101002”

C3 an

debug [pimatic-homeduino]: led4: { id: 23895, command: ‘code:00001100’ }
18:02:51debug [pimatic-homeduino]: led3: { id: 23895, command: ‘bright+’ }
18:02:51debug [pimatic-homeduino]: led2: { id: 23895, command: ‘code:00001100’ }
18:02:51debug [pimatic-homeduino]: led1: { id: 23895, command: ‘code:00001100’ }
18:02:51debug [pimatic-homeduino]: contact2: { id: 666255, contact: false }
18:02:51debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:02:51debug [pimatic-homeduino]: switch15: { id: 382320, unit: 0, state: false, all: true }
18:02:51debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:02:51debug [pimatic-homeduino]: switch5: { id: 666255, unit: 2, all: false, state: false }
18:02:51debug [pimatic-homeduino]: received: [ 416, 1284, 13320 ] 01100110101001100110011001101010010101011010010102
18:02:51debug [pimatic-homeduino]: data: “RF receive 416 1284 13320 0 0 0 0 0 01100110101001100110011001101010010101011010010102”

D1 aus

debug [pimatic-homeduino]: led4: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: led3: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: led2: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: led1: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: contact2: { id: 688831, contact: false }
18:03:23debug [pimatic-homeduino]: pir2: { unit: 21, id: 0, presence: true }
18:03:23debug [pimatic-homeduino]: switch15: { id: 359744, unit: 2, state: false, all: false }
18:03:23debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:03:23debug [pimatic-homeduino]: switch5: { id: 688831, unit: 0, all: true, state: false }
18:03:23debug [pimatic-homeduino]: received: [ 408, 508, 1292, 13332 ] 02200220022020202021022002200202020202020202202003
18:03:23debug [pimatic-homeduino]: data: “RF receive 408 1292 508 13332 0 0 0 0 01100110011010101012011001100101010101010101101003”

D1 an

debug [pimatic-homeduino]: led4: { id: 22484, command: ‘code:00001100’ }
18:03:43debug [pimatic-homeduino]: led3: { id: 22484, command: ‘bright+’ }
18:03:43debug [pimatic-homeduino]: led2: { id: 22484, command: ‘code:00001100’ }
18:03:43debug [pimatic-homeduino]: led1: { id: 22484, command: ‘code:00001100’ }
18:03:43debug [pimatic-homeduino]: contact2: { id: 688831, contact: false }
18:03:43debug [pimatic-homeduino]: pir2: { unit: 21, id: 0, presence: true }
18:03:43debug [pimatic-homeduino]: switch15: { id: 359744, unit: 0, state: false, all: true }
18:03:43debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:03:43debug [pimatic-homeduino]: switch5: { id: 688831, unit: 2, all: false, state: false }
18:03:43debug [pimatic-homeduino]: received: [ 416, 512, 1284, 13304 ] 02200220022120202020022002200202020202022020020203
18:03:43debug [pimatic-homeduino]: data: “RF receive 416 1284 512 13304 0 0 0 0 01100110011210101010011001100101010101011010010103”

D2 aus

debug [pimatic-homeduino]: led4: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: led3: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: led2: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: led1: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: contact2: { id: 690367, contact: false }
17:30:08debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:08debug [pimatic-homeduino]: switch15: { id: 358208, unit: 2, state: false, all: false }
17:30:08debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:08debug [pimatic-homeduino]: switch5: { id: 690367, unit: 0, all: true, state: false }
17:30:08debug [pimatic-homeduino]: received: [ 416, 1288, 13312 ] 01100110011010100110101001100101010101010101101002
17:30:08debug [pimatic-homeduino]: data: “RF receive 416 1288 13312 0 0 0 0 0 01100110011010100110101001100101010101010101101002”

D2 an

debug [pimatic-homeduino]: led4: { id: 22388, command: ‘code:00001100’ }
17:30:20debug [pimatic-homeduino]: led3: { id: 22388, command: ‘bright+’ }
17:30:20debug [pimatic-homeduino]: led2: { id: 22388, command: ‘code:00001100’ }
17:30:20debug [pimatic-homeduino]: led1: { id: 22388, command: ‘code:00001100’ }
17:30:20debug [pimatic-homeduino]: contact2: { id: 690367, contact: false }
17:30:20debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:20debug [pimatic-homeduino]: switch15: { id: 358208, unit: 0, state: false, all: true }
17:30:20debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:20debug [pimatic-homeduino]: switch5: { id: 690367, unit: 2, all: false, state: false }
17:30:20debug [pimatic-homeduino]: received: [ 412, 1288, 13276 ] 01100110011010100110101001100101010101011010010102
17:30:20debug [pimatic-homeduino]: data: “RF receive 412 1288 13276 0 0 0 0 0 01100110011010100110101001100101010101011010010102”

D3 aus

debug [pimatic-homeduino]: led4: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: led3: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: led2: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: led1: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: contact2: { id: 690831, contact: false }
17:30:37debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:37debug [pimatic-homeduino]: switch15: { id: 357744, unit: 2, state: false, all: false }
17:30:37debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:37debug [pimatic-homeduino]: switch5: { id: 690831, unit: 0, all: true, state: false }
17:30:36debug [pimatic-homeduino]: received: [ 420, 1284, 13332 ] 01100110011010100110011001101010010101010101101002
17:30:36debug [pimatic-homeduino]: data: “RF receive 420 1284 13332 0 0 0 0 0 01100110011010100110011001101010010101010101101002”

D3 an

debug [pimatic-homeduino]: led4: { id: 22359, command: ‘code:00001100’ }
17:30:49debug [pimatic-homeduino]: led3: { id: 22359, command: ‘bright+’ }
17:30:49debug [pimatic-homeduino]: led2: { id: 22359, command: ‘code:00001100’ }
17:30:49debug [pimatic-homeduino]: led1: { id: 22359, command: ‘code:00001100’ }
17:30:49debug [pimatic-homeduino]: contact2: { id: 690831, contact: false }
17:30:49debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:49debug [pimatic-homeduino]: switch15: { id: 357744, unit: 0, state: false, all: true }
17:30:49debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:49debug [pimatic-homeduino]: switch5: { id: 690831, unit: 2, all: false, state: false }
17:30:49debug [pimatic-homeduino]: received: [ 420, 1280, 13292 ] 01100110011010100110011001101010010101011010010102
17:30:49debug [pimatic-homeduino]: data: “RF receive 420 1280 13292 0 0 0 0 0 01100110011010100110011001101010010101011010010102”

andrewtpoint

@andrewtpoint said:

hi, okay. here the received data for all combinations from the switch:

Hope you can use it for implementation in a new switch

A1 aus

17:19:44debug [pimatic-homeduino]: led4: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: led3: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: led2: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: led1: { id: 54740, command: ‘code:00000011’ }
17:19:44debug [pimatic-homeduino]: contact2: { id: 172735, contact: false }
17:19:44debug [pimatic-homeduino]: pir2: { unit: 5, id: 8, presence: true }
17:19:44debug [pimatic-homeduino]: switch15: { id: 875840, unit: 2, state: false, all: false }
17:19:44debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:19:44debug [pimatic-homeduino]: switch5: { id: 172735, unit: 0, all: true, state: false }
17:19:44debug [pimatic-homeduino]: received: [ 416, 1284, 13276 ] 10100110011001101010011001100101010101010101101002
17:19:44debug [pimatic-homeduino]: data: “RF receive 1284 416 13276 0 0 0 0 0 01011001100110010101100110011010101010101010010112”

A1 an

17:19:39debug [pimatic-homeduino]: led4: { id: 54740, command: ‘code:00001100’ }
17:19:39debug [pimatic-homeduino]: led3: { id: 54740, command: ‘bright+’ }
17:19:39debug [pimatic-homeduino]: led2: { id: 54740, command: ‘code:00001100’ }
17:19:39debug [pimatic-homeduino]: led1: { id: 54740, command: ‘code:00001100’ }
17:19:39debug [pimatic-homeduino]: contact2: { id: 172735, contact: false }
17:19:39debug [pimatic-homeduino]: pir2: { unit: 5, id: 8, presence: true }
17:19:39debug [pimatic-homeduino]: switch15: { id: 875840, unit: 0, state: false, all: true }
17:19:39debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:19:39debug [pimatic-homeduino]: switch5: { id: 172735, unit: 2, all: false, state: false }
17:19:39debug [pimatic-homeduino]: received: [ 412, 1280, 13244 ] 10100110011001101010011001100101010101011010010102
17:19:39debug [pimatic-homeduino]: data: “RF receive 1280 412 13244 0 0 0 0 0 01011001100110010101100110011010101010100101101012”

A2 aus

debug [pimatic-homeduino]: led4: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: led3: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: led2: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: led1: { id: 54644, command: ‘code:00000011’ }
17:33:28debug [pimatic-homeduino]: contact2: { id: 174271, contact: false }
17:33:28debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:33:28debug [pimatic-homeduino]: switch15: { id: 874304, unit: 2, state: false, all: false }
17:33:28debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:33:28debug [pimatic-homeduino]: switch5: { id: 174271, unit: 0, all: true, state: false }
17:33:28debug [pimatic-homeduino]: received: [ 420, 1284, 13304 ] 10100110011001100110101001100101010101010101101002
17:33:28debug [pimatic-homeduino]: data: “RF receive 1284 420 13304 0 0 0 0 0 01011001100110011001010110011010101010101010010112”

A2 an

debug [pimatic-homeduino]: led4: { id: 54644, command: ‘code:00001100’ }
17:33:44debug [pimatic-homeduino]: led3: { id: 54644, command: ‘bright+’ }
17:33:44debug [pimatic-homeduino]: led2: { id: 54644, command: ‘code:00001100’ }
17:33:44debug [pimatic-homeduino]: led1: { id: 54644, command: ‘code:00001100’ }
17:33:44debug [pimatic-homeduino]: contact2: { id: 174271, contact: false }
17:33:44debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:33:44debug [pimatic-homeduino]: switch15: { id: 874304, unit: 0, state: false, all: true }
17:33:44debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:33:44debug [pimatic-homeduino]: switch5: { id: 174271, unit: 2, all: false, state: false }
17:33:44debug [pimatic-homeduino]: received: [ 416, 1284, 13244 ] 10100110011001100110101001100101010101011010010102
17:33:44debug [pimatic-homeduino]: data: “RF receive 1284 416 13244 0 0 0 0 0 01011001100110011001010110011010101010100101101012”

A3 aus

debug [pimatic-homeduino]: led4: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: led3: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: led2: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: led1: { id: 54615, command: ‘code:00000011’ }
17:34:02debug [pimatic-homeduino]: contact2: { id: 174735, contact: false }
17:34:02debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:34:02debug [pimatic-homeduino]: switch15: { id: 873840, unit: 2, state: false, all: false }
17:34:02debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:02debug [pimatic-homeduino]: switch5: { id: 174735, unit: 0, all: true, state: false }
17:34:02debug [pimatic-homeduino]: received: [ 420, 1280, 13312 ] 10100110011001100110011001101010010101010101101002
17:34:02debug [pimatic-homeduino]: data: “RF receive 1280 420 13312 0 0 0 0 0 01011001100110011001100110010101101010101010010112”

A3 an

debug [pimatic-homeduino]: led4: { id: 54615, command: ‘code:00001100’ }
17:34:17debug [pimatic-homeduino]: led3: { id: 54615, command: ‘bright+’ }
17:34:17debug [pimatic-homeduino]: led2: { id: 54615, command: ‘code:00001100’ }
17:34:17debug [pimatic-homeduino]: led1: { id: 54615, command: ‘code:00001100’ }
17:34:17debug [pimatic-homeduino]: contact2: { id: 174735, contact: false }
17:34:17debug [pimatic-homeduino]: pir2: { unit: 5, id: 10, presence: true }
17:34:17debug [pimatic-homeduino]: switch15: { id: 873840, unit: 0, state: false, all: true }
17:34:17debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:17debug [pimatic-homeduino]: switch5: { id: 174735, unit: 2, all: false, state: false }
17:34:17debug [pimatic-homeduino]: received: [ 420, 1280, 13280 ] 10100110011001100110011001101010010101011010010102
17:34:17debug [pimatic-homeduino]: data: “RF receive 1280 420 13280 0 0 0 0 0 01011001100110011001100110010101101010100101101012”

B1 aus

debug [pimatic-homeduino]: led4: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: led3: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: led2: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: led1: { id: 30164, command: ‘code:00000011’ }
17:34:33debug [pimatic-homeduino]: contact2: { id: 565951, contact: false }
17:34:33debug [pimatic-homeduino]: pir2: { unit: 17, id: 8, presence: true }
17:34:33debug [pimatic-homeduino]: switch15: { id: 482624, unit: 2, state: false, all: false }
17:34:33debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:33debug [pimatic-homeduino]: switch5: { id: 565951, unit: 0, all: true, state: false }
17:34:33debug [pimatic-homeduino]: received: [ 416, 1284, 13296 ] 01101010011001101010011001100101010101010101101002
17:34:33debug [pimatic-homeduino]: data: “RF receive 416 1284 13296 0 0 0 0 0 01101010011001101010011001100101010101010101101002”

B1 an

debug [pimatic-homeduino]: led4: { id: 30164, command: ‘code:00001100’ }
17:34:48debug [pimatic-homeduino]: led3: { id: 30164, command: ‘bright+’ }
17:34:48debug [pimatic-homeduino]: led2: { id: 30164, command: ‘code:00001100’ }
17:34:48debug [pimatic-homeduino]: led1: { id: 30164, command: ‘code:00001100’ }
17:34:48debug [pimatic-homeduino]: contact2: { id: 565951, contact: false }
17:34:48debug [pimatic-homeduino]: pir2: { unit: 17, id: 8, presence: true }
17:34:48debug [pimatic-homeduino]: switch15: { id: 482624, unit: 0, state: false, all: true }
17:34:48debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:34:48debug [pimatic-homeduino]: switch5: { id: 565951, unit: 2, all: false, state: false }
17:34:48debug [pimatic-homeduino]: received: [ 412, 496, 1284, 13272 ] 02202020022002202020022002200202020202022021020203
17:34:48debug [pimatic-homeduino]: data: “RF receive 412 1284 496 13272 0 0 0 0 01101010011001101010011001100101010101011012010103”

B2 aus

debug [pimatic-homeduino]: led4: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: led3: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: led2: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: led1: { id: 30068, command: ‘code:00000011’ }
17:35:01debug [pimatic-homeduino]: contact2: { id: 567487, contact: false }
17:35:01debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:35:01debug [pimatic-homeduino]: switch15: { id: 481088, unit: 2, state: false, all: false }
17:35:01debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:35:01debug [pimatic-homeduino]: switch5: { id: 567487, unit: 0, all: true, state: false }
17:35:01debug [pimatic-homeduino]: received: [ 416, 1284, 13304 ] 01101010011001100110101001100101010101010101101002
17:35:01debug [pimatic-homeduino]: data: “RF receive 416 1284 13304 0 0 0 0 0 01101010011001100110101001100101010101010101101002”

B2 an

debug [pimatic-homeduino]: led4: { id: 30068, command: ‘code:00001100’ }
17:35:27debug [pimatic-homeduino]: led3: { id: 30068, command: ‘bright+’ }
17:35:27debug [pimatic-homeduino]: led2: { id: 30068, command: ‘code:00001100’ }
17:35:27debug [pimatic-homeduino]: led1: { id: 30068, command: ‘code:00001100’ }
17:35:27debug [pimatic-homeduino]: contact2: { id: 567487, contact: false }
17:35:27debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:35:27debug [pimatic-homeduino]: switch15: { id: 481088, unit: 0, state: false, all: true }
17:35:27debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:35:27debug [pimatic-homeduino]: switch5: { id: 567487, unit: 2, all: false, state: false }
17:35:27debug [pimatic-homeduino]: received: [ 416, 1284, 13296 ] 01101010011001100110101001100101010101011010010102
17:35:27debug [pimatic-homeduino]: data: “RF receive 416 1284 13296 0 0 0 0 0 01101010011001100110101001100101010101011010010102”

B3 aus

debug [pimatic-homeduino]: led4: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: led3: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: led2: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: led1: { id: 30039, command: ‘code:00000011’ }
17:35:47debug [pimatic-homeduino]: contact2: { id: 567951, contact: false }
17:35:47debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:35:47debug [pimatic-homeduino]: switch15: { id: 480624, unit: 2, state: false, all: false }
17:35:47debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:35:47debug [pimatic-homeduino]: switch5: { id: 567951, unit: 0, all: true, state: false }
17:35:47debug [pimatic-homeduino]: received: [ 420, 1284, 13352 ] 01101010011001100110011001101010010101010101101002
17:35:47debug [pimatic-homeduino]: data: “RF receive 420 1284 13352 0 0 0 0 0 01101010011001100110011001101010010101010101101002”

B3 an

debug [pimatic-homeduino]: led4: { id: 30039, command: ‘code:00001100’ }
17:36:04debug [pimatic-homeduino]: led3: { id: 30039, command: ‘bright+’ }
17:36:04debug [pimatic-homeduino]: led2: { id: 30039, command: ‘code:00001100’ }
17:36:04debug [pimatic-homeduino]: led1: { id: 30039, command: ‘code:00001100’ }
17:36:04debug [pimatic-homeduino]: contact2: { id: 567951, contact: false }
17:36:04debug [pimatic-homeduino]: pir2: { unit: 17, id: 10, presence: true }
17:36:04debug [pimatic-homeduino]: switch15: { id: 480624, unit: 0, state: false, all: true }
17:36:04debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:36:04debug [pimatic-homeduino]: switch5: { id: 567951, unit: 2, all: false, state: false }
17:36:04debug [pimatic-homeduino]: received: [ 420, 1284, 13332 ] 01101010011001100110011001101010010101011010010102
17:36:04debug [pimatic-homeduino]: data: “RF receive 420 1284 13332 0 0 0 0 0 01101010011001100110011001101010010101011010010102”

C1 aus

debug [pimatic-homeduino]: led4: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: led3: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: led2: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: led1: { id: 24020, command: ‘code:00000011’ }
18:00:37debug [pimatic-homeduino]: contact2: { id: 664255, contact: false }
18:00:37debug [pimatic-homeduino]: pir2: { unit: 20, id: 8, presence: true }
18:00:37debug [pimatic-homeduino]: switch15: { id: 384320, unit: 2, state: false, all: false }
18:00:37debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:00:37debug [pimatic-homeduino]: switch5: { id: 664255, unit: 0, all: true, state: false }
18:00:37debug [pimatic-homeduino]: received: [ 420, 1284, 13296 ] 01100110101001101010011001100101010101010101101002
18:00:37debug [pimatic-homeduino]: data: “RF receive 420 1284 13296 0 0 0 0 0 01100110101001101010011001100101010101010101101002”

C1 an

debug [pimatic-homeduino]: led4: { id: 24020, command: ‘code:00001100’ }
18:01:04debug [pimatic-homeduino]: led3: { id: 24020, command: ‘bright+’ }
18:01:04debug [pimatic-homeduino]: led2: { id: 24020, command: ‘code:00001100’ }
18:01:04debug [pimatic-homeduino]: led1: { id: 24020, command: ‘code:00001100’ }
18:01:04debug [pimatic-homeduino]: contact2: { id: 664255, contact: false }
18:01:04debug [pimatic-homeduino]: pir2: { unit: 20, id: 8, presence: true }
18:01:04debug [pimatic-homeduino]: switch15: { id: 384320, unit: 0, state: false, all: true }
18:01:04debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:01:04debug [pimatic-homeduino]: switch5: { id: 664255, unit: 2, all: false, state: false }
18:01:04debug [pimatic-homeduino]: received: [ 412, 520, 1284, 13280 ] 02200220202002202020022002200202020202022021020203
18:01:04debug [pimatic-homeduino]: data: “RF receive 412 1284 520 13280 0 0 0 0 01100110101001101010011001100101010101011012010103”

C2 aus

debug [pimatic-homeduino]: led4: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: led3: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: led2: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: led1: { id: 23924, command: ‘code:00000011’ }
18:01:50debug [pimatic-homeduino]: contact2: { id: 665791, contact: false }
18:01:50debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:01:50debug [pimatic-homeduino]: switch15: { id: 382784, unit: 2, state: false, all: false }
18:01:50debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:01:50debug [pimatic-homeduino]: switch5: { id: 665791, unit: 0, all: true, state: false }
18:01:50debug [pimatic-homeduino]: received: [ 404, 504, 1292, 13312 ] 02210220202002200220202102200202020202020202202003
18:01:50debug [pimatic-homeduino]: data: “RF receive 404 1292 504 13312 0 0 0 0 01120110101001100110101201100101010101010101101003”

C2 an

debug [pimatic-homeduino]: led4: { id: 23924, command: ‘code:00001100’ }
18:02:08debug [pimatic-homeduino]: led3: { id: 23924, command: ‘bright+’ }
18:02:08debug [pimatic-homeduino]: led2: { id: 23924, command: ‘code:00001100’ }
18:02:08debug [pimatic-homeduino]: led1: { id: 23924, command: ‘code:00001100’ }
18:02:08debug [pimatic-homeduino]: contact2: { id: 665791, contact: false }
18:02:08debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:02:08debug [pimatic-homeduino]: switch15: { id: 382784, unit: 0, state: false, all: true }
18:02:07debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:02:07debug [pimatic-homeduino]: switch5: { id: 665791, unit: 2, all: false, state: false }
18:02:07debug [pimatic-homeduino]: received: [ 348, 496, 1288, 13312 ] 02210221212102210221212102210202020202022121020203
18:02:07debug [pimatic-homeduino]: data: “RF receive 348 1288 496 13312 0 0 0 0 01120112121201120112121201120101010101011212010103”

C3 aus

debug [pimatic-homeduino]: led4: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: led3: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: led2: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: led1: { id: 23895, command: ‘code:00000011’ }
18:02:29debug [pimatic-homeduino]: contact2: { id: 666255, contact: false }
18:02:29debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:02:29debug [pimatic-homeduino]: switch15: { id: 382320, unit: 2, state: false, all: false }
18:02:29debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:02:29debug [pimatic-homeduino]: switch5: { id: 666255, unit: 0, all: true, state: false }
18:02:29debug [pimatic-homeduino]: received: [ 420, 1284, 13348 ] 01100110101001100110011001101010010101010101101002
18:02:29debug [pimatic-homeduino]: data: “RF receive 420 1284 13348 0 0 0 0 0 01100110101001100110011001101010010101010101101002”

C3 an

debug [pimatic-homeduino]: led4: { id: 23895, command: ‘code:00001100’ }
18:02:51debug [pimatic-homeduino]: led3: { id: 23895, command: ‘bright+’ }
18:02:51debug [pimatic-homeduino]: led2: { id: 23895, command: ‘code:00001100’ }
18:02:51debug [pimatic-homeduino]: led1: { id: 23895, command: ‘code:00001100’ }
18:02:51debug [pimatic-homeduino]: contact2: { id: 666255, contact: false }
18:02:51debug [pimatic-homeduino]: pir2: { unit: 20, id: 10, presence: true }
18:02:51debug [pimatic-homeduino]: switch15: { id: 382320, unit: 0, state: false, all: true }
18:02:51debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:02:51debug [pimatic-homeduino]: switch5: { id: 666255, unit: 2, all: false, state: false }
18:02:51debug [pimatic-homeduino]: received: [ 416, 1284, 13320 ] 01100110101001100110011001101010010101011010010102
18:02:51debug [pimatic-homeduino]: data: “RF receive 416 1284 13320 0 0 0 0 0 01100110101001100110011001101010010101011010010102”

D1 aus

debug [pimatic-homeduino]: led4: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: led3: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: led2: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: led1: { id: 22484, command: ‘code:00000011’ }
18:03:23debug [pimatic-homeduino]: contact2: { id: 688831, contact: false }
18:03:23debug [pimatic-homeduino]: pir2: { unit: 21, id: 0, presence: true }
18:03:23debug [pimatic-homeduino]: switch15: { id: 359744, unit: 2, state: false, all: false }
18:03:23debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:03:23debug [pimatic-homeduino]: switch5: { id: 688831, unit: 0, all: true, state: false }
18:03:23debug [pimatic-homeduino]: received: [ 408, 508, 1292, 13332 ] 02200220022020202021022002200202020202020202202003
18:03:23debug [pimatic-homeduino]: data: “RF receive 408 1292 508 13332 0 0 0 0 01100110011010101012011001100101010101010101101003”

D1 an

debug [pimatic-homeduino]: led4: { id: 22484, command: ‘code:00001100’ }
18:03:43debug [pimatic-homeduino]: led3: { id: 22484, command: ‘bright+’ }
18:03:43debug [pimatic-homeduino]: led2: { id: 22484, command: ‘code:00001100’ }
18:03:43debug [pimatic-homeduino]: led1: { id: 22484, command: ‘code:00001100’ }
18:03:43debug [pimatic-homeduino]: contact2: { id: 688831, contact: false }
18:03:43debug [pimatic-homeduino]: pir2: { unit: 21, id: 0, presence: true }
18:03:43debug [pimatic-homeduino]: switch15: { id: 359744, unit: 0, state: false, all: true }
18:03:43debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
18:03:43debug [pimatic-homeduino]: switch5: { id: 688831, unit: 2, all: false, state: false }
18:03:43debug [pimatic-homeduino]: received: [ 416, 512, 1284, 13304 ] 02200220022120202020022002200202020202022020020203
18:03:43debug [pimatic-homeduino]: data: “RF receive 416 1284 512 13304 0 0 0 0 01100110011210101010011001100101010101011010010103”

D2 aus

debug [pimatic-homeduino]: led4: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: led3: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: led2: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: led1: { id: 22388, command: ‘code:00000011’ }
17:30:08debug [pimatic-homeduino]: contact2: { id: 690367, contact: false }
17:30:08debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:08debug [pimatic-homeduino]: switch15: { id: 358208, unit: 2, state: false, all: false }
17:30:08debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:08debug [pimatic-homeduino]: switch5: { id: 690367, unit: 0, all: true, state: false }
17:30:08debug [pimatic-homeduino]: received: [ 416, 1288, 13312 ] 01100110011010100110101001100101010101010101101002
17:30:08debug [pimatic-homeduino]: data: “RF receive 416 1288 13312 0 0 0 0 0 01100110011010100110101001100101010101010101101002”

D2 an

debug [pimatic-homeduino]: led4: { id: 22388, command: ‘code:00001100’ }
17:30:20debug [pimatic-homeduino]: led3: { id: 22388, command: ‘bright+’ }
17:30:20debug [pimatic-homeduino]: led2: { id: 22388, command: ‘code:00001100’ }
17:30:20debug [pimatic-homeduino]: led1: { id: 22388, command: ‘code:00001100’ }
17:30:20debug [pimatic-homeduino]: contact2: { id: 690367, contact: false }
17:30:20debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:20debug [pimatic-homeduino]: switch15: { id: 358208, unit: 0, state: false, all: true }
17:30:20debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:20debug [pimatic-homeduino]: switch5: { id: 690367, unit: 2, all: false, state: false }
17:30:20debug [pimatic-homeduino]: received: [ 412, 1288, 13276 ] 01100110011010100110101001100101010101011010010102
17:30:20debug [pimatic-homeduino]: data: “RF receive 412 1288 13276 0 0 0 0 0 01100110011010100110101001100101010101011010010102”

D3 aus

debug [pimatic-homeduino]: led4: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: led3: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: led2: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: led1: { id: 22359, command: ‘code:00000011’ }
17:30:37debug [pimatic-homeduino]: contact2: { id: 690831, contact: false }
17:30:37debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:37debug [pimatic-homeduino]: switch15: { id: 357744, unit: 2, state: false, all: false }
17:30:37debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:37debug [pimatic-homeduino]: switch5: { id: 690831, unit: 0, all: true, state: false }
17:30:36debug [pimatic-homeduino]: received: [ 420, 1284, 13332 ] 01100110011010100110011001101010010101010101101002
17:30:36debug [pimatic-homeduino]: data: “RF receive 420 1284 13332 0 0 0 0 0 01100110011010100110011001101010010101010101101002”

D3 an

debug [pimatic-homeduino]: led4: { id: 22359, command: ‘code:00001100’ }
17:30:49debug [pimatic-homeduino]: led3: { id: 22359, command: ‘bright+’ }
17:30:49debug [pimatic-homeduino]: led2: { id: 22359, command: ‘code:00001100’ }
17:30:49debug [pimatic-homeduino]: led1: { id: 22359, command: ‘code:00001100’ }
17:30:49debug [pimatic-homeduino]: contact2: { id: 690831, contact: false }
17:30:49debug [pimatic-homeduino]: pir2: { unit: 21, id: 2, presence: true }
17:30:49debug [pimatic-homeduino]: switch15: { id: 357744, unit: 0, state: false, all: true }
17:30:49debug [pimatic-homeduino]: switch7: { unit: 0, id: 0, state: false }
17:30:49debug [pimatic-homeduino]: switch5: { id: 690831, unit: 2, all: false, state: false }
17:30:49debug [pimatic-homeduino]: received: [ 420, 1280, 13292 ] 01100110011010100110011001101010010101011010010102
17:30:49debug [pimatic-homeduino]: data: “RF receive 420 1280 13292 0 0 0 0 0 01100110011010100110011001101010010101011010010102”

Could you do something with my received debug?