Model: GS-IWDS07
Type: contact4
Description: contact
Notes: Sends open and close signals, good range, powered with single aaa battery, blue signal led, two pieces of 3M tape included
Development of contact4 protocol is in progress:
Contact04
Supported devices (plug and play)
Model: GS-IWDS07
Type: contact4
Description: contact
Notes: Sends open and close signals, good range, powered with single aaa battery, blue signal led, two pieces of 3M tape included
Development of contact4 protocol is in progress:
Contact04
Brand: Home Easy
Model: HE800S
Type: rawswitch
Description: Socket Switch 460W
Notes: Flat design
Brand: Rohrmotor24
Model: RMF-R1/UP
Type: shutter3
Notes: keeps configuration after power loss, flush-mounted, external push-button can be used also
Deep flush socket is needed to mount inside wall
https://www.rohrmotor24.eu/RMF-Funkempfaenger-UP-fuer-1-Motor
Same, but cheaper:
http://www.ebay.de/itm/Funkempfanger-nachrusten-f-Rolladen-Jalousie-Markisenmotoren-/171356816049?hash=item27e5a982b1
@top44 and @chrizzz86 Thank you for your valuable posts! I have updated the list accordingly.
@chrizzz86 We already had RMF-R1/UP listed. Thus I have integrated your comments with the existing entry.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Brand: Heitech
Model: Nr: 04002373
Type: switch2
Notes: Set of 3 switches 1 RC, 1000W
@chrizzz86 Thanks! Updated
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Brand: Comag
Model: Set of 4 socket switches
Type: switch2
Description: Socket Switch
Notes: usable via pimatic-plugin-homeduino
Info HowTo use it via pimatic-plugin-homduino
Comag article number: 9068
housecode: dip-sw [ 1 2 3 4 5] = [value 16+8+4+2+1]
unitCode: dip-sw [A B C D E] = [value 16+8+4+2+1]
@Rainer-Michael-Gottert Thanks! Updated
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Please help Update this list. It is great for beginner. Thanks.
Added
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Brand: unknown
Type: pir6
Notes: push buttons with 1-3 buttons, 27A battery
@chrizzz86 Thanks. Added it to “Sensors” section
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Thanks for help
My Conrad Wireless PIR RSW881T will not work fine.
I can see on/off but i can not send on/off to Switch.
Yesterday i added following device successful to pimatic
{
"protocols": [
{
"name": "pir2",
"options": {
"unit": 29,
"id": 13
}
}
],
"id": "Window",
"name": "window",
"class": "HomeduinoRFPir",
"autoReset": true
}
],
I find it a bit unfortunate that I get only a signal when opening
The plan is to: remove the reed contact and replace it with a float switch like this:
Etekcity Remote Plug
Sold on Amazon. Where Avaiable on Cyber Week in a pair of 3 and 5.
I use my since 8 months.
Protocol “switch 8”. But for me not all program codes worked.
Config Sample
{
"protocols": [
{
"name": "switch8",
"options": {
"systemcode": 24,
"programcode": "B2"
},
"send": true
}
],
"forceSend": true,
"id": "etekcity-b2",
"name": "💡 LED Leiste Sofa",
"class": "HomeduinoRFSwitch"
}
Intertechno ITL-500
Shutter Controller.
Using currently three of them of >6 months. No issues
Protocol “switch1”
Sample Config:
{
"protocols": [
{
"name": "switch1",
"options": {
"id": 20260578,
"unit": 21
}
}
],
"id": "hauswirtschaftsraum_rollade1",
"name": "Hauswirtschaftsraum",
"class": "HomeduinoRFShutter"
}
Thanks for help
I have buy me ELRO HE877. It will not work at start. But if i use the trick from “magic-tune”. It work.
After switching to learn mode and pressing the pimatic ON Button (switch1) with Random ID, the original remote and pimatic are working fine.
Brand: KERUI
Type: contact 3
Description: (open / closed) Door/Windows Sensors
https://www.aliexpress.com/item/433-MHz-Wireless-Door-Windows-Sensors-for-KERUI-Alarm-System-Magnetic-Door-Sensor-Door-Open-reminder/32683518296.html?spm=2114.40010708.4.34.P86pNC
Tested: OK
Battery: 12v
@Andi-Tudor and @Raducanu Thanks! Updated
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Found a working Doorbell on Amazon:
Brand: iLome Doorbell
Type: pir6
Description: Doorbell
Notes: Discovered via AutoDiscovery, no AutoReset needed, works out of the Box like a charm
Sold at Amazon.de:
https://www.amazon.de/gp/product/B01J5GV6UC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1