Hello,
i have some blinds with which i can set the shading, so in fact i have created some rules to lower complete down, then UP to set the correct position to have some more light in the room.
Example:
if Raffstore3_stellung is pressed then lower Raffstore3 and after 30 seconds raise Raffstore3 and after 32.3 seconds lower Raffstore3 and after 33.5 seconds stop Raffstore3.
The problem here is, that the blind will move down, but sometimes the low timings to go UP and DOWN and STOP won´t be recocnized
it seems, that sometimes an delay of 2 seconds are 1 second and 1 seconds somtimes are 3 seconds…
Btw. is it possible to integrate that timings in homeduino if a specified code will be send ? Or could there be another solution ?