HomeduinoRFSwitch 'on' is 'off' and vice versa

---

Hi all,

I am using the latest stable version of Pimatic on my Raspberry Pi 3. I have an EspimaticRF as homeduino connected via USB and an EspimaticRF node set up with 433MHz transmitter. Everything is set up the way it should be and I can send (and theoretically, receive) 433MHz signals.

However, ‘on’ and ‘off’ are reversed and I could not figure out how to set them correctly. Well… I could fix the problem in the webGUI by setting xOnLabel and xOffLabel to the appropriate values; however, setting up rules is kind of difficult. For example, if I want to automatically shut off a device after x minutes, I actually need to set up a rule turning the device ‘on’ (but, in this scenario, meaning ‘off’).

If it helps, I am using Brennenstuhl remote controlled outlets which this kind of protocol: housecode 3 unitcode 4. I cannot set ‘on’ or ‘off’ within the protocol…

Thanks in advance

you could use a dummy switch and use it in rules then.
WHEN dummyswitch is turned off THEN turn brennenstuhlswitch on
and vice versa