DHT interval

---

I´m using two dht22-sensor on an breadboard for testing.
It works so far, but the logging didn´t realise the interval I defined in config.

{
      "id": "DHT22",
      "name": "dht22",
      "class": "DHTSensor",
      "type": 22,
      "pin": 0,
      "interval": 120000
    },
    {
      "id": "DHT22-1",
      "name": "dht22-1",
      "class": "DHTSensor",
      "type": 22,
      "pin": 2,
      "interval": 60000
    },

With these intervals I should get data every 6 or 12 minutes. For the 120000 I get 6 minutes and for the 60000 I get 5 minutes!
Are there other parameters to set?

the time is given in milliseconds.
60000 miliseconds are one minute. so usually you should get readings for one minute or 120000= two minutes

6 minutes would be 360000 miliseconds and 12 minutes would be 720000 miliseconds then …
strange that you get other tim intervals with your given period.

just give it a try with my above suggestion and report back.