Window motor driven opener? ('elektrischer Fensterstellantrieb)

---

Hi,
has anybody implemented a motor driven window opener solution with Pimatic ('elektrischer Fensterstellantrieb)?
I need this in addition to my already implemented intelligent fan based houseventilation.

What alternatives are available (or thinkable) which works (might work) with pimatic? e.g.:
a) 433mhz control (via homeduino)
b) Homematic controlled
c) motor controlled by a simple relais (open/close)

For a) I’ve found some devices which seems to work with 433MhZ and programmable codes:

Motor himself
https://www.nothnagel-haustechnik.de/product_info.php?info=p1068_Motorline----MJ1—Kippfensterantrieb.html&XTCsid=bce773a1b40546ebc8cb32f53ca959c2
433Mhz controll:
https://www.nothnagel-haustechnik.de/product_info.php?info=p1005_Motorline—MC4----LRX2217-SET–LR2200–LRS2200----Steuerung-fuer-Rolllaeden–Markisen.html

for b) i’ve found this Homematic product ‘Homematic 083373 Fensterantrieb WinMatic’ at elv
https://www.elv.de/homematic-winmatic-fensterantrieb.html?refid=SEM_30003?refid=SEM_30003&gclid=CjwKCAjww9_MBRAWEiwAlaMJZg5U1FAQ-gc8bdLQtUADe5hQjGrVBUS1oeW6wIdntMIPvfSWwUH7zhoCY7gQAvD_BwE

Has anybody experience with these devices or a better idea / solution?
THX in advice!

just a suggestion, but are there any motors that can be controlled like a “simple” shutter motor - 4 cables: 1 phase up, 1 phase down, neutral and earth. If so, you can use an intertechno cmr500 for example. it’s a 433mhz receiver for shutters.
http://intertechno.at/wp-content/uploads/2015/09/manual-CMR-500.pdf

@leader21 said in Window motor driven opener? ('elektrischer Fensterstellantrieb):

intertechno cmr500

Thanks for the hint. Didn’t got the idea to use shutter control for this kind of usage. But unsure how the safety mechanism could be assured with this approach (I guess that the normal control from vendors handles the opening and closing times for the motor)

the common shutter for blinds has an adjustable endpoint where the motor stops automatically and powers off when the endpoint is reached.
the cmr500 (and all other similar devices) is switching on for some minutes so there is always power on at that time. but this does not matter since the shutter motor has the automatical endpoint shut-off and will be powerless then.
and the advantage of the shutter controllers like the cmr500 - you are never able to switch both phases for up / down at the same time. if so, it would damage the motor!

if you are having a similar window motor this could work with the mentioned RF shutter devices.

but maybe there are other possibilities or hardware / motors that i am not aware of.

@fennsen said in Window motor driven opener? ('elektrischer Fensterstellantrieb):

Hi,
has anybody implemented a motor driven window opener solution with Pimatic ('elektrischer Fensterstellantrieb)?
Motor himself
https://www.nothnagel-haustechnik.de/product_info.php?info=p1068_Motorline----MJ1—Kippfensterantrieb.html&XTCsid=bce773a1b40546ebc8cb32f53ca959c2

I have allready implated a similar motor like above. I have build a case in that are relays who can be activated with an pin of the raspi or a switch what is also in this case.
With this switch you can open and close manualy. It gives also end switches so that the power of the motor be cut and pimatic knows that the window is full open or close.
In pimatic I monitor the temperature of the room and in winter when the room gets too cold then pimatic closed the window.
It gives also a rain sensor (who not work so good…) so that pimatic can close the window if it rains.
This build is only for people who knows what the do because you work with 220V.

So the shutter switch who leader21 recomened is maybe the better solution.