I made a rtl_433 receiver a long time ago and integrated this in the vhduino… That’s the module I was talking about @layereight
Help, homeduino not working anymore [Solved]
Thanks for fast reply.
I have some of the cheap and bad ones and one RXB6. No one is working.
Ok i think i got it.
Copied your config example from your git. It seems it all has to be in the right order.
sorry for the delayed reply. Were you able to solve your problem in the meantime? As far as I can see it, everything looks good.
How close do you come with your remote to the receiver in order to test receiving?
good to hear from you. Also sorry for the delayed reply.
What module exactly are you referring to? I know there are some “old” DVB-T sticks out there with Realtek chips that can be tuned to receive 433MHz signals. Do you suggest @cbrauweiler to get one of those because they are better? How to configure the homeduino plugin then? Could you elaborate a bit further on this topic, please?
@layereight As i said above it is fixed. more or less The plugin config must have the right order like above and like in the example on git.
Actually i can receive and send, but i don`t see the receives in the debug log but i got the data from an outdoor temperature sensor.
Anyone got the fix available the link is broken…
the fix was merged back to the original project and released by @mwittig. Just install the latest version of the homeduino plugin. It should just work fine. Also see: https://forum.pimatic.org/topic/4612/pimatic-homeduino-0-9-15/7
Thank you for the uplifting news 😁
On my system which is installed new and everything is up to date, the homeduino switches does not work anymore. I always get an timeout, but no log messages. Does anyone know this behavior and has a solution for it?
@fregger Yes i recognized this also and have written in the forum about it. But after the update, the homeduino does still send nothing in the logs.
I am using more and more osram smart plug but its not fine if the homeduino still is not working.