is a MySensorsDHT Device… the id is wrong i know it is for testing -> try and error
I use a DHT22 on the Homeduino with this, but is no MySensors
MySensors ID ?!
is a MySensorsDHT Device… the id is wrong i know it is for testing -> try and error
I use a DHT22 on the Homeduino with this, but is no MySensors
@wuschel said in MySensors ID ?!:
What is wrong with the DHT?!
Please take into to account that DHT sensor might be broken as we had some cases in the past. Make sure you have some spare sensor you can test with.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Thats it… I use the DHT22 from my test Breadboard and it works…
Sensor ID 255? Is that really needed? I use only 0 and 1 and it is working.
@Swen said in MySensors ID ?!:
Sensor ID 255? Is that really needed? I use only 0 and 1 and it is working.
is not needed, i use 0 and 1
But you setting has input 255.
That was testing -> Try and Error
OK, please post code what are you really using or we look for bad thinks they are not there.
Which sketch are you using? MySensor DHT?
yes i use this sketch
https://www.mysensors.org/build/debug
Check NodeId… I think its not 4 its 255…