[solved]Yeelight RGB Bulb - pimatic-led-light plugin
I’ve added a yeelight rgb lamp. Also works well with the pimatic-led-light plugin. Now to my problem. I want to let the lamp flash. Have the following rule tried. Unfortunately does not work.
Would like to visualize my door bell.
When
contact of doorbell=ring
then
set lamp to red and switch lamp on and after 2 seconds switch lamp off and switch lamp on and after 2 seconds switch lamp off
What am I doing wrong?
@top44 said in Yeelight RGB Bulb - pimatic-led-light plugin:
What am I doing wrong?
All actions will be executed in parallel. Thus, you need to use a growing delay for the chained actions. The following example works well for me. I am using “switch on” only for the first action and “toggle” subsequently, but of course, you can also using alternating “switch on” and “off” commands instead.
switch milight-device on and toggle milight-device after 1s and toggle milight-device after 2s and toggle milight-device after 3s and toggle milight-device after 4s and toggle milight-device after 5s"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@mwittig said in Yeelight RGB Bulb - pimatic-led-light plugin:
All actions will be executed in parallel.
That was my problem. I thought the rule is running successively. Now it works wonderfully. Thank you for your quick response.