@leader21
Just a little Update:
There he is … so cute xD
With this or a Solution like this you have to check and think a lot about it. Why?
-
This is only a Receiver -> If you switch it with the “Lightswitch” then Pimatic will not know that the Switch is off or on … thats a big problem when you want to Automatic everything with rules
-
This piece of Hardware can you only use in a little spectrum because you need a “neutral” (blue) in your Lightswitchbox and also you need a enough space to get it in. And it must be just a single Switch for Light nothing more, is there more like 2 Switches or something like that you cant use this thing.
I build me a littte testbench to just check out the device… it looks like that … (not so cute xD)
As pictured here its possible to connect a Light directy to the 300-mini… this is good if you dont want to change your House wiring. Its a option, i want to use in my Hallway … i buy 3 new 433 Lightswitches and 2x 300-Mini to setup the two lights there and mount the 433-Lightswichtes on the top of the original ones.
i do this Testbench just to setup the Button in Pimatic and to check if the Device is working. i check also what would happen if you put this think after switches… the Result if the 300-mini losses his power and gets them back the light will be stay off.
In the moment i have to check a litte bit stuff with the cabling etc… but a bigger Question is how to fix the Problem that you get no feedback from the 300-mini to pimatic.
I want later in the Lamps the new IKEA smart lights … so that i can turn on the light over 433mhz and Dimming the lights over the Smart Lamps.
Anybody know if Phlipps Hue (i hear its similar to IKEA) changes the State in Pimatic when a light is On and the light are switched on by the switch on the Wall? if that lamps changes is state then you can mate Rules to set the 433 Mhz Device everytime on the right State.
thats all for the moment folks