@mwittig said in Connect a Brennenstuhl RF Switch with homeduino.....or the "eternal fight":

@agentjk said in Connect a Brennenstuhl RF Switch with homeduino.....or the "eternal fight":

I was not able to get this switches running with the “learning mode of pimatic”, any tips or help ?

Unfortunately the “how to” articles do not cover the learning mode (aka. device discovery) for 433 Mhz devices. Generally it should work as follows.
Make sure the remote is paired with the sockets you have (depending on the mode you have either DIP switch/turn-wheel configuration or product-specific learning mode) Login into pimatic UI and open the Settings / Devices page Now, click on the “Discover Devices” button in the upper right corner of the UI. When he discovery mode has started press a button on the remote. After the discovery period has passed (20 seconds) you should see a list of candidate devices discovered. There may be multiple candidates for your socket. Suitable candidates should use a switch<N> protocol. Add the device which appears to be must applicable and give it a try. If the device works as expected (it is possible to change the socket state from pimatic, status changes performed with the remote are reflected in pimatic) you can repeat the discovery for the other sockets.

When i try this, i get no info.
I use the debug modus of homeduino, then i get this bunch of cryptic number

"…debug [pimatic-homeduino]: rolling1: { code: ‘100011100000110101110000’ }
20:43:05debug [pimatic-homeduino]: received: [ 496, 1032, 2992, 7224 ] 10010101101010010101010110100110011010100101010123
20:43:05debug [pimatic-homeduino]: data: "RF receive 1032 496 2992 7224 0 0 0 0 01101010010101101010101001011001100101011010101023"
20:43:03debug [pimatic-homeduino]: rolling1: { code: ‘100011000110000101000000’ }
20:43:03debug [pimatic-homeduino]: received: [ 480, 1048, 2984, 7236 ] 10010101101001010110100101010110011001010101010123
20:43:03debug [pimatic-homeduino]: data: "RF receive 1048 480 2984 7236 0 0 0 0 01101010010110101001011010101001100110101010101023"
20:43:02debug [pimatic-homeduino]: rolling1: { code: ‘100001010010100000110000’ }
20:43:02debug [pimatic-homeduino]: received: [ 476, 1052, 2988, 7236 ] 10010101011001100101100110010101010110100101010123
20:43:02debug [pimatic-homeduino]: data: "RF receive 1052 476 2988 7236 0 0 0 0 01101010100110011010011001101010101001011010101023"
20:42:59debug [pimatic-homeduino]: received: [ 412, 932, 3024, 7320 ] 11010101111111010101010111110111011111110101010123
20:42:59debug [pimatic-homeduino]: data: "RF receive 932 412 3024 7320 0 0 0 0 00101010000000101010101000001000100000001010101023"
20:42:56debug [pimatic-homeduino]: received: [ 428, 596, 952, 2996, 7244 ] 22020202222222020202020222220221022121210202020234
20:42:56debug [pimatic-homeduino]: data: "RF receive 952 428 596 2996 7244 0 0 0 00101010000000101010101000001002100202021010101034"
20:42:55debug [pimatic-homeduino]: received: [ 420, 596, 968, 2976, 7244 ] 22020202022202220202220222020202020222210202020234
20:42:55debug [pimatic-homeduino]: data: "RF receive 968 420 596 2976 7244 0 0 0 00101010100010001010001000101010101000021010101034"
20:41:22debug [pimatic-homeduino]: received: [ 420, 952, 2964, 7240 ] 11010101111101010111110101010111011101010101010123
20:41:22debug [pimatic-homeduino]: data: "RF receive 952 420 2964 7240 0 0 0 0 00101010000010101000001010101000100010101010101023"
20:41:21debug [pimatic-homeduino]: received: [ 424, 864, 2976, 7244 ] 11010101110111111111111101110111110111110101010123
20:41:21debug [pimatic-homeduino]: data: "RF receive 864 424 2976 7244 0 0 0 0 00101010001000000000000010001000001000001010101023"
20:41:20debug [pimatic-homeduino]: received: [ 428, 900, 2976, 7252 ] 11010101111111010101010111110111011111110101010123
20:41:20debug [pimatic-homeduino]: data: “RF receive 900 428 2976 7252 0 0 0 0 00101010000000101010101000001000100000001010101023"
20:41:12debug [pimatic-homeduino]: received: [ 496, 1020, 3004, 7268 ] 10010101101010010101010110100110011010110101010123
20:41:12debug [pimatic-homeduino]: data: “RF receive 1020 496 3004 7268 0 0 0 0 01101010010101101010101001011001100101001010101023”…”

as far as i know, this is some kind of rollingcode but i was not able to get wit work with the rollingswitch protocol

[solved] Inverted Switch States