Connect to webapplications via subdomain not via port

Guest

Hello Friends,
because my system now runs very good. i had to look for a new work.
And i found something…
I have about 10 Applications which are running on the server now…
some just in my own network, some also from outside.
they are reachable by some different ports.
is it possible to bundle these application to one port, just by using some subdomains?

current status:

new status (prefer “https”):

i doesn’t find a guide to get this setup to work…

mwittig

@chris I think you’re a mixing subdomain versus path redirects. Using a subdomain would be using something like https://pimatic.<mydomain>.com while using a path rewriting would be using something like https://www.<mydomain>/pimatic proxying requests to your internal server. Both can be accomplished by setting up a reverse web proxy (server side proxy).

For a sub-domain example see https://forum.pimatic.org/topic/1298/solved-pimatic-with-nginx/9 where pimatic is running on the same host as the proxy listening at http://127.0.0.1:8080
For a path rewriting & forwarding example see https://forum.pimatic.org/topic/1298/solved-pimatic-with-nginx/11 where pimatic is running on the same host as the proxy listening http://127.0.0.1:80

A reverse proxy can be setup by using Apache (you may need to install additional modules) or nginx, the latter is used in the referenced examples.

Guest

Ok you are right @mwittig .
I meant path directions.
can somebody give me good guide?
i tried this evening again more than one hour but it won’t work…

Mit freundlichen Grüßen
Chris