Homedruino possibility to catch rf raw code and send it without protocol

---

Hi,
I have already migrated my switches from pilight to pimatic and it works great with supported protocols.

Now I would like to learn RF code from my wireless thermostat and send the on/off code to be able control my heating. As I know there is not known protocol for this device. In pilight there is pilight-debug and pilight-send function with raw code.http://wiki.pilight.org/doku.php/pdebug It worked well to control my heating.
Do we have similar functions in Pimatic?
Thank you, Michal

@misakm Its possible to send the raw code (serial port), but not within pimatic. This has to be added.

@sweebee

This funciton will be appreciated at leat for me Do you know if it is already planned?

@misakm I think @sweetpi or @Icesory can implement this quite easy. But open a feature request in the feature request forum.

I have some weeks ago the basic ideas for this.
But in generally it is the better way to implement the needed protocol. For this is the development/RF protocol area in this forum.

Generally I agree that for common use switches, dimmers, ect it is good to have protocol. But if you have some specific device it would be hard to to this. Am I thinking wrong?

In the past i have only seen two protocols which we cant implement. But one of them is in with direct patterns like an raw protocol.
For homeduino i have two ideas.
First
We implement a really raw protocol so the user can define the buckets and compress timings in the device configuration.
Second
We implement a actionHandler to send Commands to the Homeduino Driver like this

If button1 is pressed then Homeduino send "RF send 4 2 200 1000 4000 0 0 0 0 0 10100010110100100100002"

But both need some huge expansions of the pimatic-homeduino plugin.

Yes it would be great to have this send function

That would be great! Using a raw protocol I could drop pilight completly (–> Mumbi / Flamingo switches)