Thank you but still does not work
255.255.255.0 or default 255.255.255.255
Wake up Zyxel NAS310 with wakeonlan Plugin does not work
Thank you but still does not work
255.255.255.0 or default 255.255.255.255
@strato345 the only difference I see is that my mac is upper case but that’s probably not the problem. You should rather check if you are using the right mac address.
pimatic-hap - pimatic HomeKit bridge
pimatic-echo - Amazon echo integration
pimatic-dash-button - Amazon dash button support
pimatic-alarm - pimatic alarm system
Like my work? Then consider a donation
Follow me: https://twitter.com/michaelkotten
It is the right address I have an app on the smartphone with which it works.
I despair😢
Try to set “broadcastAddress” to the network-specific broadcast address. In my case it is “192.168.178.255”. Restart pimatic after changing it. You can determine the network-specific
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
@michbeck100 said in Wake up Zyxel NAS310 with wakeonlan Plugin does not work:
the only difference I see is that my mac is upper case but that’s probably not the problem
Just to confirm. The plugin accepts both lower case and uppercase MAC addresses
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
Yes it was the brodcast adress. It works 😀😀😀👍👍thx
Now I still need a solution for the automatic shutdown
Sorry or a Button for shutdown in Pimatic
@strato345 said in Wake up Zyxel NAS310 with wakeonlan Plugin does not work:
Sorry or a Button for shutdown in Pimatic
You perhaps can do this by executing a remote command on the NAS via ssh. To keep it simple you can use a ShellSwitch for this (use onCommand, set offCommand to echo, leave getStateCommand empty). Later you can build something using a ButtonsDevice, a rule, and an execute command)
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
I would have to settle these orders one by one.
Http://192.168.xxx/r41128,/adv//cgi-bin/weblogin.cgi?password=xxx&username=xxx
Http://192.168.xxx/r41128,/adv//cgi-bin/remote_help-cgi?type=backdoor
Http://192.168.xxx/r41128,/adv//cgi-bin/zysh-cgi?c0=shutdown "
How do i do this in pimatic?
you can use a dummybutton and a rule like
WHEN dummy button is pressed THEN execute "curl -s http://command1 >/dev/null 2>&1" and after 2 seconds execute "curl -s http://command2 >/dev/null 2>&1" and after 4 seconds execute "curl -s http://command3 >/dev/null 2>&1"
or create a shell script that contains the above curl commands and execute this script in the rule.
anyway, you need to have the pimatic-shell-execute plugin installed!
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebook
make it so !