Change Pimatic Variable over API with ESPEasy

---

Hello,
i play around with some small ESP devices running ESPEasy. So far the work quite good and i query the values via the HTTP Interface of the ESP.
Now i want one ESP to push a value directly to an variable in Pimatic using the API.

I had already some tries but no success so far…
I think the ESPEasy command SentToHTTP would be the solution but i´m not sure about the string i have to send.

Maybe someone has already experience or an example for me!

Thanks

greetings
Alexander

Look in the playground and use the _C022.ino.
That one contains the REST-Api to pimatic.
Copy it in the espeasy folder and recompile. Using this you can simply push your sensor values to pimatic or send values (relay) to the espeasy.

Edit: Or download this latest R147_RC8 from my website with _C022 compiled in.
Note that this is technically speaking not the stable R120 version, but it’s now running for more than 20 days on 3 units without issues.

Edit 2: Corrected the link

Thanks for your help!

I never compiled the ESPEasy firmware myself until now… maybe i will have to start this now.

i would be very glad to use your pre-compiled image, but the link is not working ??!!??

Sorry. I realised I had put the bin in the wrong folder and moved it but had not updated the link. Now it’s correct.

thanks for the upload, i will try it this evening!

Edit: Firmware upload: ok! running without problems!
Connect to pimatic… perfect! Sensor is sending data like expected!