[solved]Pimatic-homeduino sends wrong code

---

Hello,

I have always used pilight. Now I want to use Pimatic-homeduino.
I have installed a new image installation has worked well.
In Pilight he shows everything right.
It does not work if I change the switch.

I have installed to tested pilight. With “pilight-receive” I checked what Pimatic does.

Result:

pi@raspberrypi:~ $ pilight-receive
{

    "message": {
            "systemcode": 12,
            "unitcode": 24,
            "state": "opened"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 1

}
{

    "message": {
            "systemcode": 12,
            "unitcode": 24,
            "state": "on"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 1

}
{

    "message": {
            "id": 21,
            "systemcode": 1360,
            "unit": 5,
            "state": "on"
    },
    "origin": "receiver",
    "protocol": "daycom",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 1

}
{

    "message": {
            "unitcode": 1026810,
            "state": "opened"
    },
    "origin": "receiver",
    "protocol": "ev1527",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 1

}
{

    "message": {
            "systemcode": 8,
            "unitcode": 24,
            "state": "opened"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 2

}
{

    "message": {
            "systemcode": 8,
            "unitcode": 24,
            "state": "on"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 2

}
{

    "message": {
            "id": 21,
            "systemcode": 1368,
            "unit": 5,
            "state": "on"
    },
    "origin": "receiver",
    "protocol": "daycom",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 2

}
{

    "message": {
            "unitcode": 1026794,
            "state": "opened"
    },
    "origin": "receiver",
    "protocol": "ev1527",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 2

}
{

    "message": {
            "systemcode": 8,
            "unitcode": 24,
            "state": "opened"
    },
    "origin": "receiver",
    "protocol": "elro_800_contact",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 3

}
{

    "message": {
            "systemcode": 8,
            "unitcode": 24,
            "state": "on"
    },
    "origin": "receiver",
    "protocol": "elro_800_switch",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 3

}
{

    "message": {
            "id": 21,
            "systemcode": 1360,
            "unit": 5,
            "state": "on"
    },
    "origin": "receiver",
    "protocol": "daycom",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 3

}
{

    "message": {
            "unitcode": 1026794,
            "state": "opened"
    },
    "origin": "receiver",
    "protocol": "ev1527",
    "uuid": "0000-b8-27-eb-bc4f7b",
    "repeats": 3

}
{

    "message": {
            "gpio": 7,
            "temperature": 18.9,
            "humidity": 58.5
    },
    "origin": "receiver",
    "protocol": "dht22",
    "uuid": "0000-b8-27-eb-bc4f7b"

}

Pimatic-homeduino sends wrong code. Why?

My pilight Config:

"devices": {
	"Licht": {
		"protocol": [ "kaku_switch_old" ],
		"id": [{
			"id": 3,
			"unit": 2
		}],
		"state": "off"
	}, 

…

My pimatic Config:

{
  "protocols": [
    {
      "name": "switch4",
      "options": {
        "unit": 2,
        "id": 3
      }
    }
  ],
  "id": "test1",
  "name": "schalter1",
  "class": "HomeduinoRFSwitch"
},
{
  "id": "test2",
  "name": "schalter2",
  "class": "HomeduinoRFSwitch",
  "protocols": [
    {
      "name": "switch4",
      "options": {
        "id": 3,
        "unit": 2
      }
    }
  ]

Regards Valentin

Maybee you have to change the system- and unitcode. I have changed from pilight to pimatic for about 2 years and my issue was the calculate of this codes.
SEE

The protocol “kaku_switch_old” and “switch4” is the same (see).
Then the system and unit code can not be different. Or?

Can I receive with pimatic?

yes you can receive with pimatic but as V1per said, the codes are different. You can’t use the old ones from pilight one-to-one in pimatic.
If you have a remote that you use to control the switches, you can easily see which code is received by pimatic-homeduino

Yes you can under devices and then Autodiscover, or under Messages and debug you can see if pimatic know the Signal (Autodiscover) or if anythink comes over the Receiver (debug).
But I think you have to activate the debug Modus first are I’m rignt @mwittig

@V1per said in Pimatic-homeduino sends wrong code:

But I think you have to activate the debug Modus first are I’m rignt @mwittig

Well, the debug mode for the pimatic-homeduino plugin is enabled by default. The debug mode set a set as part of the plugin settings.

Now I understand it. The system and unitcode are different.

Thank you very much @V1per, @rikki78 and @mwittig

SOLVED