[solved]433 signals not in debug

---

Hi All,

Ive setup homeduino using my arduino nano, all is working fine, installed plugin, bootloader, hookedup my 433 receiver and transmitter, send some signals form my KaKu remote, see a LED flashing on the arduino, but… Nothing in my debug log!

What am i doing wrong?!

When running screen /dev/ttyUSB0 115200from the Pi, it works fine and i do see transmits.

edit:
Just yet i get a timeout error in PiMatic…

TimeoutError: operation timed out
at afterTimeout (/home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/bluebird/js/main/timers.js:11:15)
at null.timeoutTimeout (/home/pi/pimatic-app/node_modules/pimatic-homeduino/node_modules/homeduino/node_modules/bluebird/js/main/timers.js:53:9)
at Timer.listOnTimeout (timers.js:92:15)

The error is gone after restarting my pi, might have been a wire issue, however, the debug does still not show any debug details.

after checking the logs again and configs, it seems i forgot to enable debug at the homeduino device in the config.json - after that it did take 4 reboots to get ti working, now it works.

nice to hear!
then have fun with pimatic